[PATCH 6/6] arm64: dts: amlogic: g12: assign the MMC A signal clock

[Jerome Brunet]

The amlogic MMC driver operate with the assumption that MMC clock
is configured to provide 24MHz. It uses this path for low
rates such as 400kHz.

Assign the clock to make sure it is properly configured

Fixes: 8a6b3ca2d361 ("arm64: dts: meson: g12a: add SDIO controller")
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 0085612cf735..00609d2da674 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -2431,6 +2431,9 @@ sd_emmc_a: mmc at ffe03000 {
 				 <&clkc CLKID_FCLK_DIV2>;
 			clock-names = "core", "clkin0", "clkin1";
 			resets = <&reset RESET_SD_EMMC_A>;
+
+			assigned-clocks = <&clkc CLKID_SD_EMMC_A_CLK0>;
+			assigned-clock-rates = <24000000>;
 		};
 
 		sd_emmc_b: mmc at ffe05000 {

-- 
2.47.3