[PATCH 1/2] arm64: dts: amlogic: Enable the npu node on Radxa Zero 2

[Ricardo Pardini via B4 Relay]

From: Ricardo Pardini <ricardo at pardini.net>

The Zero2 is also an A311D just like the VIM3, enable its npu.

Signed-off-by: Ricardo Pardini <ricardo at pardini.net>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
index 1e5c6f9849456..a37776d22b09e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-radxa-zero2.dts
@@ -394,6 +394,10 @@ &pwm_AO_cd {
 	status = "okay";
 };
 
+&npu {
+	status = "okay";
+};
+
 &saradc {
 	status = "okay";
 	vref-supply = <&vddao_1v8>;

-- 
2.52.0