[PATCH 0/2] NPU and i2c3 + FUSB302 addition for Radxa Zero 2

[Ricardo Pardini via B4 Relay]

This series adds a few things missing from the Radxa Zero 2:

1) NPU (etnaviv), just enable the node, similar to what was done for VIM3
2) i2c3 (also exposed on the 40-pin header) and the FUSB302 at 0x22

Signed-off-by: Ricardo Pardini <ricardo at pardini.net>
---
Ricardo Pardini (2):
      arm64: dts: amlogic: Enable the npu node on Radxa Zero 2
      arm64: dts: amlogic: add the type-c controller on Radxa Zero 2

 .../boot/dts/amlogic/meson-g12b-radxa-zero2.dts    | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
---
base-commit: 0f61b1860cc3f52aef9036d7235ed1f017632193
change-id: 20260114-arm64-dts-amlogic-radxa-zero2-additions-905549fbed3e

Best regards,
-- 
Ricardo Pardini <ricardo at pardini.net>