[PATCH v8 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example

[Marco Felsch]

Hi Frank,

On 26-01-13, Frank Li wrote:
> On Tue, Jan 13, 2026 at 08:07:27PM +0100, Marco Felsch wrote:
> > From: Liu Ying <victor.liu at nxp.com>
> >
> > i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
> > configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> > field. Document the Parallel Display Format Configuration(PDFC) subnode
> > and add the subnode to example.
> >
> > Signed-off-by: Liu Ying <victor.liu at nxp.com>
> > [m.felsch at pengutronix.de: port to v6.18-rc1]
> > [m.felsch at pengutronix.de: add bus-width]
> > Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
> > ---
> >  .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 79 ++++++++++++++++++++++
> >  1 file changed, 79 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > index 34aea58094e55365a2f9c86092f637e533f954ff..82d30e4140f4d511bc59665370d561efe7a707bd 100644
> > --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> > @@ -40,6 +40,58 @@ properties:
> >      minItems: 8
> >      maxItems: 10
> >
> > +  dpi-bridge:
> > +    type: object
> > +    additionalProperties: false
> > +
> > +    properties:
> > +      compatible:
> > +        enum:
> > +          - nxp,imx91-pdfc
> > +          - nxp,imx93-pdfc
> > +
> > +      ports:
> > +        $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +        properties:
> > +          port at 0:
> > +            $ref: /schemas/graph.yaml#/properties/port
> > +            description: Input port node to receive pixel data.
> > +
> > +          port at 1:
> > +            $ref: /schemas/graph.yaml#/$defs/port-base
> > +            unevaluatedProperties: false
> > +            description: Output port node to downstream pixel data receivers.
> > +
> > +            properties:
> > +              endpoint:
> > +                $ref: /schemas/media/video-interfaces.yaml#
> > +                unevaluatedProperties: false
> > +
> > +                properties:
> > +                  bus-width:
> > +                    enum: [ 16, 18, 24 ]
> > +                    description:
> > +                      Specify the physical parallel bus width.
> > +
> > +                      This property is optional if the display bus-width
> > +                      matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
> > +                      is connected and all 18-bit data lines are muxed to the
> > +                      parallel-output pads.
> > +
> > +                      This property must be set to 18 to cut only the LSBs
> > +                      instead of the MSBs in case a 24-bit RGB888 display is
> > +                      connected and only the lower 18-bit data lanes are muxed
> > +                      to the parallel-output pads.
> > +
> > +        required:
> > +          - port at 0
> > +          - port at 1
> > +
> > +    required:
> > +      - compatible
> > +      - ports
> > +
> >  allOf:
> >    - if:
> >        properties:
> > @@ -81,6 +133,7 @@ allOf:
> >              - const: isi
> >              - const: csi
> >              - const: dsi
> > +
> 
> remove this unnecessary changes

Yes this change is not necessary but I wanted to format the file
properly and I thought it can be done in this patch as well since the
change is really small without the need of a separate patch.

Regards,
  Marco


> 
> Frank
> >  required:
> >    - compatible
> >    - reg
> > @@ -112,4 +165,30 @@ examples:
> >                 clock-names = "apb", "axi", "nic", "disp", "cam",
> >                               "pxp", "lcdif", "isi", "csi", "dsi";
> >        #power-domain-cells = <1>;
> > +
> > +      dpi-bridge {
> > +        compatible = "nxp,imx93-pdfc";
> > +
> > +        ports {
> > +          #address-cells = <1>;
> > +          #size-cells = <0>;
> > +
> > +          port at 0 {
> > +            reg = <0>;
> > +
> > +            pdfc_from_lcdif: endpoint {
> > +              remote-endpoint = <&lcdif_to_pdfc>;
> > +            };
> > +          };
> > +
> > +          port at 1 {
> > +            reg = <1>;
> > +
> > +            pdfc_to_panel: endpoint {
> > +              remote-endpoint = <&panel_from_pdfc>;
> > +              bus-width = <18>;
> > +            };
> > +          };
> > +        };
> > +      };
> >      };
> >
> > --
> > 2.47.3
> >
> 

-- 
#gernperDu 
#CallMeByMyFirstName

Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |