[PATCH v8 1/3] dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example
Frank Li
Frank.li at nxp.com
Tue Jan 13 12:18:41 PST 2026
On Tue, Jan 13, 2026 at 08:07:27PM +0100, Marco Felsch wrote:
> From: Liu Ying <victor.liu at nxp.com>
>
> i.MX93 SoC mediamix blk-ctrl contains one DISPLAY_MUX register which
> configures parallel display format by using the "PARALLEL_DISP_FORMAT"
> field. Document the Parallel Display Format Configuration(PDFC) subnode
> and add the subnode to example.
>
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> [m.felsch at pengutronix.de: port to v6.18-rc1]
> [m.felsch at pengutronix.de: add bus-width]
> Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
> ---
> .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 79 ++++++++++++++++++++++
> 1 file changed, 79 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> index 34aea58094e55365a2f9c86092f637e533f954ff..82d30e4140f4d511bc59665370d561efe7a707bd 100644
> --- a/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml
> @@ -40,6 +40,58 @@ properties:
> minItems: 8
> maxItems: 10
>
> + dpi-bridge:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + compatible:
> + enum:
> + - nxp,imx91-pdfc
> + - nxp,imx93-pdfc
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port at 0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: Input port node to receive pixel data.
> +
> + port at 1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: Output port node to downstream pixel data receivers.
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + bus-width:
> + enum: [ 16, 18, 24 ]
> + description:
> + Specify the physical parallel bus width.
> +
> + This property is optional if the display bus-width
> + matches the SoC bus-width, e.g. a 18-bit RGB666 (display)
> + is connected and all 18-bit data lines are muxed to the
> + parallel-output pads.
> +
> + This property must be set to 18 to cut only the LSBs
> + instead of the MSBs in case a 24-bit RGB888 display is
> + connected and only the lower 18-bit data lanes are muxed
> + to the parallel-output pads.
> +
> + required:
> + - port at 0
> + - port at 1
> +
> + required:
> + - compatible
> + - ports
> +
> allOf:
> - if:
> properties:
> @@ -81,6 +133,7 @@ allOf:
> - const: isi
> - const: csi
> - const: dsi
> +
remove this unnecessary changes
Frank
> required:
> - compatible
> - reg
> @@ -112,4 +165,30 @@ examples:
> clock-names = "apb", "axi", "nic", "disp", "cam",
> "pxp", "lcdif", "isi", "csi", "dsi";
> #power-domain-cells = <1>;
> +
> + dpi-bridge {
> + compatible = "nxp,imx93-pdfc";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> +
> + pdfc_from_lcdif: endpoint {
> + remote-endpoint = <&lcdif_to_pdfc>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> +
> + pdfc_to_panel: endpoint {
> + remote-endpoint = <&panel_from_pdfc>;
> + bus-width = <18>;
> + };
> + };
> + };
> + };
> };
>
> --
> 2.47.3
>
More information about the linux-arm-kernel
mailing list