[PATCH v4 12/15] arm64: dts: microchip: add LAN969x clock header file
Robert Marko
robert.marko at sartura.hr
Tue Jan 13 05:57:24 PST 2026
On Sun, Jan 11, 2026 at 3:42 PM claudiu beznea <claudiu.beznea at tuxon.dev> wrote:
>
>
>
> On 12/29/25 20:37, Robert Marko wrote:
> > LAN969x uses hardware clock indexes, so document theses in a header to make
> > them humanly readable.
> >
> > Signed-off-by: Robert Marko <robert.marko at sartura.hr>
> > ---
> > Changes in v4:
> > * Move clock indexes from dt-bindings to a DTS header
> >
> > Changes in v2:
> > * Rename file to microchip,lan9691.h
> >
> > arch/arm64/boot/dts/microchip/clk-lan9691.h | 24 +++++++++++++++++++++
> > 1 file changed, 24 insertions(+)
> > create mode 100644 arch/arm64/boot/dts/microchip/clk-lan9691.h
> >
> > diff --git a/arch/arm64/boot/dts/microchip/clk-lan9691.h b/arch/arm64/boot/dts/microchip/clk-lan9691.h
> > new file mode 100644
> > index 000000000000..f0006a603747
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/microchip/clk-lan9691.h
> > @@ -0,0 +1,24 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
>
> Shouldn't this use the same license as the dtsi including it?
Yes, its a mistake on my side, will fix it in v5.
Regards,
Robert
>
> > +
> > +#ifndef _DTS_CLK_LAN9691_H
> > +#define _DTS_CLK_LAN9691_H
> > +
> > +#define GCK_ID_QSPI0 0
> > +#define GCK_ID_QSPI2 1
> > +#define GCK_ID_SDMMC0 2
> > +#define GCK_ID_SDMMC1 3
> > +#define GCK_ID_MCAN0 4
> > +#define GCK_ID_MCAN1 5
> > +#define GCK_ID_FLEXCOM0 6
> > +#define GCK_ID_FLEXCOM1 7
> > +#define GCK_ID_FLEXCOM2 8
> > +#define GCK_ID_FLEXCOM3 9
> > +#define GCK_ID_TIMER 10
> > +#define GCK_ID_USB_REFCLK 11
> > +
> > +/* Gate clocks */
> > +#define GCK_GATE_USB_DRD 12
> > +#define GCK_GATE_MCRAMC 13
> > +#define GCK_GATE_HMATRIX 14
> > +
> > +#endif
>
--
Robert Marko
Staff Embedded Linux Engineer
Sartura d.d.
Lendavska ulica 16a
10000 Zagreb, Croatia
Email: robert.marko at sartura.hr
Web: www.sartura.hr
More information about the linux-arm-kernel
mailing list