[PATCH v4 12/15] arm64: dts: microchip: add LAN969x clock header file

[claudiu beznea]

On 12/29/25 20:37, Robert Marko wrote:
> LAN969x uses hardware clock indexes, so document theses in a header to make
> them humanly readable.
> 
> Signed-off-by: Robert Marko <robert.marko at sartura.hr>
> ---
> Changes in v4:
> * Move clock indexes from dt-bindings to a DTS header
> 
> Changes in v2:
> * Rename file to microchip,lan9691.h
> 
>   arch/arm64/boot/dts/microchip/clk-lan9691.h | 24 +++++++++++++++++++++
>   1 file changed, 24 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/microchip/clk-lan9691.h
> 
> diff --git a/arch/arm64/boot/dts/microchip/clk-lan9691.h b/arch/arm64/boot/dts/microchip/clk-lan9691.h
> new file mode 100644
> index 000000000000..f0006a603747
> --- /dev/null
> +++ b/arch/arm64/boot/dts/microchip/clk-lan9691.h
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */

Shouldn't this use the same license as the dtsi including it?

> +
> +#ifndef _DTS_CLK_LAN9691_H
> +#define _DTS_CLK_LAN9691_H
> +
> +#define GCK_ID_QSPI0		0
> +#define GCK_ID_QSPI2		1
> +#define GCK_ID_SDMMC0		2
> +#define GCK_ID_SDMMC1		3
> +#define GCK_ID_MCAN0		4
> +#define GCK_ID_MCAN1		5
> +#define GCK_ID_FLEXCOM0		6
> +#define GCK_ID_FLEXCOM1		7
> +#define GCK_ID_FLEXCOM2		8
> +#define GCK_ID_FLEXCOM3		9
> +#define GCK_ID_TIMER		10
> +#define GCK_ID_USB_REFCLK	11
> +
> +/* Gate clocks */
> +#define GCK_GATE_USB_DRD	12
> +#define GCK_GATE_MCRAMC		13
> +#define GCK_GATE_HMATRIX	14
> +
> +#endif