[PATCH v1 0/2] arm64: dts: ti: k3-am69-aquila: fix SPI hardware CS issue

[Francesco Dolcini]

On Mon, Jan 12, 2026 at 05:53:45PM +0000, Vitor Soares wrote:
> From: Vitor Soares <vitor.soares at toradex.com>
> 
> Hardware chip select does not work correctly on main_spi0 and main_spi2
> controllers on the Aquila AM69 module. Testing revealed main_spi2 loses
> CS state during runtime PM suspend, while main_spi0 cannot drive CS HIGH
> when bus is idle. This series switches both controllers to use GPIO-based
> chip select instead.

Reviewed-by: Francesco Dolcini <francesco.dolcini at toradex.com>