[PATCH v1 2/2] arm64: dts: ti: k3-am69-aquila-clover: change main_spi2 CS0 to GPIO mode

[Vitor Soares]

From: Vitor Soares <vitor.soares at toradex.com>

Change CS0 from hardware chip select to GPIO-based chip select to
align with the base aquila device tree configuration.

Fixes: 9f748a6177e1 ("arm64: dts: ti: am69-aquila: Add Clover")
Cc: stable at vger.kernel.org
Signed-off-by: Vitor Soares <vitor.soares at toradex.com>
---
 arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
index 55fd214a82e4..927d0877d7f8 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-aquila-clover.dts
@@ -208,7 +208,8 @@ &main_spi2 {
 	pinctrl-0 = <&pinctrl_main_spi2>,
 		    <&pinctrl_main_spi2_cs0>,
 		    <&pinctrl_gpio_05>;
-	cs-gpios = <0>, <&wkup_gpio0 29 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&main_gpio0 39 GPIO_ACTIVE_LOW>,
+		   <&wkup_gpio0 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	tpm at 1 {
-- 
2.52.0