[PATCH 10/27] clk: milbeaut: convert from divider_ro_round_rate() to divider_ro_determine_rate()

[Brian Masney]

The divider_ro_round_rate() function is now deprecated, so let's migrate
to divider_ro_determine_rate() instead so that this deprecated API can
be removed.

Note that when the main function itself was migrated to use
determine_rate, this was mistakenly converted to:

    req->rate = divider_round_rate(...)

This is invalid in the case when an error occurs since it can set the
rate to a negative value.

Fixes: fe67c682f91c ("clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()")
Signed-off-by: Brian Masney <bmasney at redhat.com>

---
To: Taichi Sugaya <sugaya.taichi at socionext.com>
To: Takao Orito <orito.takao at socionext.com>
Cc: linux-arm-kernel at lists.infradead.org
---
 drivers/clk/clk-milbeaut.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/clk-milbeaut.c b/drivers/clk/clk-milbeaut.c
index b4f9b7143eaa658a7f2a14ff3cc9d91d8aa071c6..4e3790b7fc9064484c20a068d0315b8fc8241290 100644
--- a/drivers/clk/clk-milbeaut.c
+++ b/drivers/clk/clk-milbeaut.c
@@ -398,13 +398,9 @@ static int m10v_clk_divider_determine_rate(struct clk_hw *hw,
 		val = readl(divider->reg) >> divider->shift;
 		val &= clk_div_mask(divider->width);
 
-		req->rate = divider_ro_round_rate(hw, req->rate,
-						  &req->best_parent_rate,
-						  divider->table,
-						  divider->width,
-						  divider->flags, val);
-
-		return 0;
+		return divider_ro_determine_rate(hw, req, divider->table,
+						 divider->width, divider->flags,
+						 val);
 	}
 
 	req->rate = divider_round_rate(hw, req->rate, &req->best_parent_rate,

-- 
2.52.0