[PATCH v7 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder

[Zhentao Guo]

Hi Krzysztof

> On Wed, Aug 12, 2026 at 10:41:25AM +0800, Zhentao Guo wrote:
>> Describe the initial support for the V4L2 stateless video decoder
>> driver used with the Amlogic S4 (S805X2) platform.
>>
>> Signed-off-by: Zhentao Guo <zhentao.guo at amlogic.com>
>> ---
>>   .../devicetree/bindings/media/amlogic,s4-vdec.yaml | 111 +++++++++++++++++++++
>>   1 file changed, 111 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
>> new file mode 100644
>> index 000000000000..b5af3f931b26
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
>> @@ -0,0 +1,111 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (C) 2025 Amlogic, Inc. All rights reserved
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/amlogic,s4-vdec.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic Video Decode Accelerator
>> +
>> +maintainers:
>> +  - Zhentao Guo <zhentao.guo at amlogic.com>
>> +
>> +description:
>> +  The Video Decoder Accelerator present on Amlogic SOCs.
>> +  It supports stateless h264 decoding.
>> +
>> +properties:
>> +  compatible:
>> +    const: amlogic,s4-vdec
>> +
>> +  reg:
>> +    maxItems: 2
>> +
>> +  reg-names:
>> +    items:
>> +      - const: dos
>> +      - const: dmc
>> +
>> +  interrupts:
>> +    maxItems: 2
>> +
>> +  interrupt-names:
>> +    items:
>> +      - const: hvdec
>> +      - const: vdec
> vdec is the name of the module, so not really useful name.
Ok, I'll come up with a new name and change it in the next revision.
>> +
>> +  clocks:
>> +    maxItems: 3
>> +
>> +  clock-names:
>> +    items:
>> +      - const: dos
>> +      - const: vdec
> Same here
OK, but there would be a nit. In file 
drivers/soc/amlogic/meson-clk-measure.c, This clock source is also named 
*"vdec"*in|drivers/soc/amlogic/meson-clk-measure.c|, where a 
*"vdec"*clock node is created in debugfs for checking its status. Using 
a different name in the driver (including DT and binding) would make it 
inconsistent with the debugfs node naming.
>> +      - const: hevcf
>> +
>> +  power-domains:
>> +    maxItems: 2
>> +
>> +  power-domain-names:
>> +    items:
>> +      - const: vdec
>> +      - const: hvdec
> Same here.
Ok, I'll rename this.
>> +
>> +  resets:
>> +    maxItems: 1
>> +
>> +  amlogic,canvas:
>> +    description: should point to a canvas provider node
> You basically duplicate the property name. Say something useful, what is
> it used for?
I'll update the description to explain its usage in the next version.
>
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +
>> +  secure-monitor:
>> +    description: phandle to the secure-monitor node
> Can a property whose type is a phandle and is called "secure-monitor" be
> not "phandle to the secure-monitor node"?
>
> Write useful code, not redundant.
Okay, I'll explain it more detailed.
> Anyway, missing vendor prefix as it is not a generic property (otherwise
> point me to generic schema defining it).
I checked the upstream code, this is not a generic property. I'll add 
the prefix.
>
> Best regards,
> Krzysztof

BRs

Zhentao