[PATCH v7 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder

[Krzysztof Kozlowski]

On Wed, Aug 12, 2026 at 10:41:25AM +0800, Zhentao Guo wrote:
> Describe the initial support for the V4L2 stateless video decoder
> driver used with the Amlogic S4 (S805X2) platform.
> 
> Signed-off-by: Zhentao Guo <zhentao.guo at amlogic.com>
> ---
>  .../devicetree/bindings/media/amlogic,s4-vdec.yaml | 111 +++++++++++++++++++++
>  1 file changed, 111 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
> new file mode 100644
> index 000000000000..b5af3f931b26
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/amlogic,s4-vdec.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2025 Amlogic, Inc. All rights reserved
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/amlogic,s4-vdec.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Amlogic Video Decode Accelerator
> +
> +maintainers:
> +  - Zhentao Guo <zhentao.guo at amlogic.com>
> +
> +description:
> +  The Video Decoder Accelerator present on Amlogic SOCs.
> +  It supports stateless h264 decoding.
> +
> +properties:
> +  compatible:
> +    const: amlogic,s4-vdec
> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: dos
> +      - const: dmc
> +
> +  interrupts:
> +    maxItems: 2
> +
> +  interrupt-names:
> +    items:
> +      - const: hvdec
> +      - const: vdec

vdec is the name of the module, so not really useful name.

> +
> +  clocks:
> +    maxItems: 3
> +
> +  clock-names:
> +    items:
> +      - const: dos
> +      - const: vdec

Same here

> +      - const: hevcf
> +
> +  power-domains:
> +    maxItems: 2
> +
> +  power-domain-names:
> +    items:
> +      - const: vdec
> +      - const: hvdec

Same here.

> +
> +  resets:
> +    maxItems: 1
> +
> +  amlogic,canvas:
> +    description: should point to a canvas provider node

You basically duplicate the property name. Say something useful, what is
it used for?

> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +  secure-monitor:
> +    description: phandle to the secure-monitor node

Can a property whose type is a phandle and is called "secure-monitor" be
not "phandle to the secure-monitor node"?

Write useful code, not redundant.

Anyway, missing vendor prefix as it is not a generic property (otherwise
point me to generic schema defining it).

Best regards,
Krzysztof