[PATCH 0/3] Add device tree support for NVIDIA Tegra CMDQV

[Ashish Mhetre]

This series adds device tree support for the CMDQ-Virtualization (CMDQV)
hardware on NVIDIA Tegra264 SoCs.

CMDQV is a hardware block that works alongside the ARM SMMUv3 to assist in
virtualizing the command queue. It was previously only supported through
ACPI on Tegra241. This series extends the existing driver to support device
tree based initialization, which is required for Tegra264 platforms.

The series is structured as follows:

Patch 1: Extends the tegra241-cmdqv driver to support device tree probing
         alongside the existing ACPI support. The SMMU driver now parses
         the nvidia,cmdqv phandle to associate each SMMU with its
         corresponding CMDQV instance.

Patch 2: Adds device tree binding documentation for nvidia,tegra264-cmdqv
         and extends the arm,smmu-v3 binding with an optional nvidia,cmdqv
         property.

Patch 3: Adds CMDQV device nodes to the Tegra264 device tree and enables
         them on the tegra264-p3834 platform.

The implementation mirrors the existing ACPI probe path to minimize code
divergence and maintain consistency with Tegra241 support.

Ashish Mhetre (3):
  iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
  dt-bindings: iommu: Add NVIDIA Tegra CMDQV support
  arm64: dts: nvidia: Add nodes for CMDQV

 .../bindings/iommu/arm,smmu-v3.yaml           | 10 ++++
 .../bindings/iommu/nvidia,tegra264-cmdqv.yaml | 46 +++++++++++++++++
 .../arm64/boot/dts/nvidia/tegra264-p3834.dtsi |  8 +++
 arch/arm64/boot/dts/nvidia/tegra264.dtsi      | 50 +++++++++++++++++++
 drivers/iommu/arm/Kconfig                     |  1 -
 drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c   | 30 +++++++++++
 .../iommu/arm/arm-smmu-v3/tegra241-cmdqv.c    | 43 +++++++++++++++-
 7 files changed, 186 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/iommu/nvidia,tegra264-cmdqv.yaml

-- 
2.25.1