[PATCH] ARM: dts: broadcom: rpi: Switch to V3D firmware clock

[Mark Brown]

On Tue, Oct 28, 2025 at 07:03:59PM +0100, Stefan Wahren wrote:
> Am 27.10.25 um 17:51 schrieb Mark Brown:

> > > Is there a HDMI cable connected?

> > No, the boards only have ethernet, serial and power connected.

> I switched to the same Raspberry Pi firmware 2023-10-17 and added U-Boot
> 2024.01 as second stage bootloader, but still not able to reproduce.

> Looking at the LAVA output, I'm seeing this as the very first issue(s):

> [   13.480675] platform wifi-pwrseq: deferred probe pending: pwrseq_simple:
> reset control not ready
> [   13.489095] platform bcm2835-power: deferred probe pending:
> bcm2835-power: Failed to get clock v3d

> Are critical drivers like clk_raspberrypi and resert_gpio listed in lsmod?

Looks like it:

   https://lava.sirena.org.uk/scheduler/job/2017219#L1616

though I don't know what else might be critical.  Note that the probe
deferral sorts itself out, there's a check for any deferred probes
pending which passes:

   https://lava.sirena.org.uk/scheduler/job/2017219#L1677

> Is there anything special in the config.txt?

Not to the best of my knowledge, though I don't know what'd be special
and it's been some considerable time since I set the boards up.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20251028/33de9957/attachment.sig>