[PATCH v8 1/2] dt-bindings: ethernet: eswin: Document for EIC7700 SoC

[Bo Gan]

Hi Zhi, ShangJuan,


On 10/15/25 04:40, weishangjuan at eswincomputing.com wrote:
> From: Shangjuan Wei <weishangjuan at eswincomputing.com>
> 
> Add ESWIN EIC7700 Ethernet controller, supporting clock
> configuration, delay adjustment and speed adaptive functions.
> 
> Signed-off-by: Zhi Li <lizhi2 at eswincomputing.com>
> Signed-off-by: Shangjuan Wei <weishangjuan at eswincomputing.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> ---
>   .../bindings/net/eswin,eic7700-eth.yaml       | 127 ++++++++++++++++++
>   1 file changed, 127 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
> new file mode 100644
> index 000000000000..9ddbfe219ae2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
> @@ -0,0 +1,127 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/eswin,eic7700-eth.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Eswin EIC7700 SOC Eth Controller
> +
> +maintainers:
> +  - Shuang Liang <liangshuang at eswincomputing.com>
> +  - Zhi Li <lizhi2 at eswincomputing.com>
> +  - Shangjuan Wei <weishangjuan at eswincomputing.com>
> +
> +description:
> +  Platform glue layer implementation for STMMAC Ethernet driver.
> +
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - eswin,eic7700-qos-eth
> +  required:
> +    - compatible
> +
> +allOf:
> +  - $ref: snps,dwmac.yaml#
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: eswin,eic7700-qos-eth
> +      - const: snps,dwmac-5.20
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-names:
> +    const: macirq
> +
> +  clocks:
> +    items:
> +      - description: AXI clock
> +      - description: Configuration clock
> +      - description: GMAC main clock
> +      - description: Tx clock
> +
> +  clock-names:
> +    items:
> +      - const: axi
> +      - const: cfg
> +      - const: stmmaceth
> +      - const: tx
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    items:
> +      - const: stmmaceth
> +
> +  rx-internal-delay-ps:
> +    enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400]
> +
> +  tx-internal-delay-ps:
> +    enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400]
> +
> +  eswin,hsp-sp-csr:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - description: Phandle to HSP(High-Speed Peripheral) device
> +      - description: Offset of phy control register for internal
> +                     or external clock selection
> +      - description: Offset of AXI clock controller Low-Power request
> +                     register
> +      - description: Offset of register controlling TX/RX clock delay
> +    description: |
> +      High-Speed Peripheral device needed to configure clock selection,
> +      clock low-power mode and clock delay.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - interrupt-names
> +  - phy-mode
> +  - resets
> +  - reset-names
> +  - rx-internal-delay-ps
> +  - tx-internal-delay-ps
> +  - eswin,hsp-sp-csr
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    ethernet at 50400000 {
> +        compatible = "eswin,eic7700-qos-eth", "snps,dwmac-5.20";
> +        reg = <0x50400000 0x10000>;
> +        clocks = <&d0_clock 186>, <&d0_clock 171>, <&d0_clock 40>,
> +                <&d0_clock 193>;

Can you let me know which clock I should use for EIC7700 (HiFive P550), if
I apply this patchset on top of XuYang's v6 clock patchset? ref:
https://lore.kernel.org/all/20251009092029.140-1-dongxuyang@eswincomputing.com/
In your vendor kernel, you have EIC7700_CLK_HSP_ETH_[APP|CSR]_CLK, but in
the v6 clock patchset, I couldn't find them. Please help translate
<186> <171> <40> <193> to the macro of v6 clock patchset, so I can help
test it.

> +        clock-names = "axi", "cfg", "stmmaceth", "tx";> +        interrupt-parent = <&plic>;
> +        interrupts = <61>;
> +        interrupt-names = "macirq";
> +        phy-mode = "rgmii-id";
> +        phy-handle = <&phy0>;> +        resets = <&reset 95>;

For reset, I assume this <95> corresponds to EIC7700_RESET_HSP_ETH0_ARST,
if applying on top of the v7 reset patchset, correct? ref:
https://lore.kernel.org/all/20250930093132.2003-1-dongxuyang@eswincomputing.com/

> +        reset-names = "stmmaceth";
> +        rx-internal-delay-ps = <200>;
> +        tx-internal-delay-ps = <200>;
> +        eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118>;
> +        snps,axi-config = <&stmmac_axi_setup>;
> +        snps,aal;
> +        snps,fixed-burst;
> +        snps,tso;
> +        stmmac_axi_setup: stmmac-axi-config {
> +            snps,blen = <0 0 0 0 16 8 4>;
> +            snps,rd_osr_lmt = <2>;
> +            snps,wr_osr_lmt = <2>;
> +        };
> +    };
> --
> 2.17.1
> 

Bo