[PATCH v8 1/2] dt-bindings: ethernet: eswin: Document for EIC7700 SoC
weishangjuan at eswincomputing.com
weishangjuan at eswincomputing.com
Wed Oct 15 04:40:41 PDT 2025
From: Shangjuan Wei <weishangjuan at eswincomputing.com>
Add ESWIN EIC7700 Ethernet controller, supporting clock
configuration, delay adjustment and speed adaptive functions.
Signed-off-by: Zhi Li <lizhi2 at eswincomputing.com>
Signed-off-by: Shangjuan Wei <weishangjuan at eswincomputing.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
.../bindings/net/eswin,eic7700-eth.yaml | 127 ++++++++++++++++++
1 file changed, 127 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
diff --git a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
new file mode 100644
index 000000000000..9ddbfe219ae2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/eswin,eic7700-eth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eswin EIC7700 SOC Eth Controller
+
+maintainers:
+ - Shuang Liang <liangshuang at eswincomputing.com>
+ - Zhi Li <lizhi2 at eswincomputing.com>
+ - Shangjuan Wei <weishangjuan at eswincomputing.com>
+
+description:
+ Platform glue layer implementation for STMMAC Ethernet driver.
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - eswin,eic7700-qos-eth
+ required:
+ - compatible
+
+allOf:
+ - $ref: snps,dwmac.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: eswin,eic7700-qos-eth
+ - const: snps,dwmac-5.20
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ const: macirq
+
+ clocks:
+ items:
+ - description: AXI clock
+ - description: Configuration clock
+ - description: GMAC main clock
+ - description: Tx clock
+
+ clock-names:
+ items:
+ - const: axi
+ - const: cfg
+ - const: stmmaceth
+ - const: tx
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: stmmaceth
+
+ rx-internal-delay-ps:
+ enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400]
+
+ tx-internal-delay-ps:
+ enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400]
+
+ eswin,hsp-sp-csr:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - description: Phandle to HSP(High-Speed Peripheral) device
+ - description: Offset of phy control register for internal
+ or external clock selection
+ - description: Offset of AXI clock controller Low-Power request
+ register
+ - description: Offset of register controlling TX/RX clock delay
+ description: |
+ High-Speed Peripheral device needed to configure clock selection,
+ clock low-power mode and clock delay.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - phy-mode
+ - resets
+ - reset-names
+ - rx-internal-delay-ps
+ - tx-internal-delay-ps
+ - eswin,hsp-sp-csr
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet at 50400000 {
+ compatible = "eswin,eic7700-qos-eth", "snps,dwmac-5.20";
+ reg = <0x50400000 0x10000>;
+ clocks = <&d0_clock 186>, <&d0_clock 171>, <&d0_clock 40>,
+ <&d0_clock 193>;
+ clock-names = "axi", "cfg", "stmmaceth", "tx";
+ interrupt-parent = <&plic>;
+ interrupts = <61>;
+ interrupt-names = "macirq";
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+ resets = <&reset 95>;
+ reset-names = "stmmaceth";
+ rx-internal-delay-ps = <200>;
+ tx-internal-delay-ps = <200>;
+ eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118>;
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,aal;
+ snps,fixed-burst;
+ snps,tso;
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,blen = <0 0 0 0 16 8 4>;
+ snps,rd_osr_lmt = <2>;
+ snps,wr_osr_lmt = <2>;
+ };
+ };
--
2.17.1
More information about the linux-arm-kernel
mailing list