[PATCH] PCI: dw-rockchip: Disable L1 substates

[Niklas Cassel]

Hello Diederik,

On Wed, Oct 15, 2025 at 03:21:48PM +0200, Diederik de Haas wrote:
> On Wed Oct 15, 2025 at 2:31 PM CEST, Niklas Cassel wrote:
> > The L1 substates support requires additional steps to work, see e.g.
> > section '11.6.6.4 L1 Substate' in the RK3588 TRM V1.0.
> 
> I visually compared '18.6.6 PCIe Power Management' of Part 2 V1.1
> (20210301) of the RK3568 TRM with '11.6.6 PCIe Power Management' of
> Part 2 V1.0 (20220309) of the RK3588 TRM.
> AFAICT they are word for word the same ... until I got to 'Table 18-14
> PCIe Interrupt Table' (RK3568) and 'Table 11-22 ...' (RK3588) where
> there are differences. I don't understand enough of this material so I
> would appreciate if you could take a look to see if that difference is
> or could be relevant.

What you should compare is "18.6.6.4 L1 Substate" of RK3658 TRM Part2 V1.1,
vs "11.6.6.4 L1 Substate" of RK3588 TRM Part2 V1.0.

But I have just done that, and I can tell you that they are identical.


Shawn also replied here:
https://lore.kernel.org/linux-pci/7df0bf91-8ab1-4e76-83fa-841a4059c634@rock-chips.com/

that there is indeed a lot of things missing for L1 substates to work,
including proper pinmuxing.


Kind regards,
Niklas