[PATCH v5 0/5] Enable Remote GPIO over RPMSG on i.MX Platform

Mathieu Poirier mathieu.poirier at linaro.org
Mon Nov 24 09:06:11 PST 2025


On Tue, Nov 04, 2025 at 02:33:10PM -0600, Shenwei Wang wrote:
> Support the remote devices on the remote processor via the RPMSG bus on
> i.MX platform.
> 
> Changes in v5:
>  - move the gpio-rpmsg.rst from admin-guide to staging directory after
>    discussion with Randy Dunlap.
>  - add include files with some code improvements per Bartosz's comments.
> 
> Changes in v4:
>  - add a documentation to describe the transport protocol per Andrew's
>    comments.
>  - add a new handler to get the gpio direction.
> 
> Changes in v3:
>  - fix various format issue and return value check per Peng 's review
>    comments.
>  - add the logic to also populate the subnodes which are not in the
>    device map per Arnaud's request. (in imx_rproc.c)
>  - update the yaml per Frank's review comments.
> 
> Changes in v2:
>  - re-implemented the gpio driver per Linus Walleij's feedback by using
>    GPIOLIB_IRQCHIP helper library.
>  - fix various format issue per Mathieu/Peng 's review comments.
>  - update the yaml doc per Rob's feedback
> 
> Cc: Bartosz Golaszewski <brgl at bgdev.pl>
> Cc: Randy Dunlap <rdunlap at infradead.org>
> Cc: Andrew Lunn <andrew at lunn.ch>
> Cc: Mathieu Poirier <mathieu.poirier at linaro.org>
> Cc: Arnaud POULIQUEN <arnaud.pouliquen at foss.st.com>
> Cc: Linus Walleij <linus.walleij at linaro.org>
> Cc: linux-gpio at vger.kernel.org
> 
> Shenwei Wang (5):
>   dt-bindings: remoteproc: imx_rproc: Add "rpmsg" subnode support
>   remoteproc: imx_rproc: Populate devices under "rpmsg" subnode
>   docs: staging: gpio-rpmsg: gpio over rpmsg bus
>   gpio: imx-rpmsg: add imx-rpmsg GPIO driver
>   arm64: dts: imx8ulp: Add rpmsg node under imx_rproc
> 
>  .../bindings/remoteproc/fsl,imx-rproc.yaml    | 123 +++++
>  Documentation/staging/gpio-rpmsg.rst          | 202 ++++++++
>  Documentation/staging/index.rst               |   1 +
>  arch/arm64/boot/dts/freescale/imx8ulp.dtsi    |  27 +
>  drivers/gpio/Kconfig                          |  17 +
>  drivers/gpio/Makefile                         |   1 +
>  drivers/gpio/gpio-imx-rpmsg.c                 | 475 ++++++++++++++++++
>  drivers/remoteproc/imx_rproc.c                | 146 ++++++
>  include/linux/rpmsg/imx_rpmsg.h               |  48 ++
>  9 files changed, 1040 insertions(+)

I started reviewing this set.  Given the size and amount of comments to go
through, it will likely take me several days.  I will tell you when I am done.

Even at this early stage of review on my side, I can already confirm the only
way to move forward with this set is by reaching a consensus that includes
Andrew, Arneaud and Linus W.

Thanks,
Mathieu

>  create mode 100644 Documentation/staging/gpio-rpmsg.rst
>  create mode 100644 drivers/gpio/gpio-imx-rpmsg.c
>  create mode 100644 include/linux/rpmsg/imx_rpmsg.h
> 
> --
> 2.43.0
> 



More information about the linux-arm-kernel mailing list