[PATCH can] can: sun4i_can: sun4i_can_interrupt(): fix max irq loop handling

[Marc Kleine-Budde]

On 16.11.2025 17:20:37, Jernej Škrabec wrote:
> Dne nedelja, 16. november 2025 ob 16:55:26 Srednjeevropski standardni čas je Marc Kleine-Budde napisal(a):
> > Reading the interrupt register `SUN4I_REG_INT_ADDR` causes all of its bits
> > to be reset. If we ever reach the condition of handling more than
> > `SUN4I_CAN_MAX_IRQ` IRQs, we will have read the register and reset all its
> > bits but without actually handling the interrupt inside of the loop body.
> >
> > This may, among other issues, cause us to never `netif_wake_queue()` again
> > after a transmission interrupt.
> >
> > Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
> > Cc: stable at vger.kernel.org
> > Co-developed-by: Thomas Mühlbacher <tmuehlbacher at posteo.net>
> > Signed-off-by: Thomas Mühlbacher <tmuehlbacher at posteo.net>
> > Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
> > ---
> > I've ported the fix from the sja1000 driver to the sun4i_can, which based
> > on the sja1000 driver.
>
> Acked-by: Jernej Skrabec <jernej.skrabec at gmail.com>

Thank you very much! I have seen a lot of feedback from you about the
sun4i driver. Would you like to become the maintainer of the driver?

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20251116/87cf1692/attachment-0001.sig>