[PATCH can] can: sun4i_can: sun4i_can_interrupt(): fix max irq loop handling

[Marc Kleine-Budde]

Reading the interrupt register `SUN4I_REG_INT_ADDR` causes all of its bits
to be reset. If we ever reach the condition of handling more than
`SUN4I_CAN_MAX_IRQ` IRQs, we will have read the register and reset all its
bits but without actually handling the interrupt inside of the loop body.

This may, among other issues, cause us to never `netif_wake_queue()` again
after a transmission interrupt.

Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Cc: stable at vger.kernel.org
Co-developed-by: Thomas Mühlbacher <tmuehlbacher at posteo.net>
Signed-off-by: Thomas Mühlbacher <tmuehlbacher at posteo.net>
Signed-off-by: Marc Kleine-Budde <mkl at pengutronix.de>
---
I've ported the fix from the sja1000 driver to the sun4i_can, which based
on the sja1000 driver.
---
 drivers/net/can/sun4i_can.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c
index 53bfd873de9b..0a7ba0942839 100644
--- a/drivers/net/can/sun4i_can.c
+++ b/drivers/net/can/sun4i_can.c
@@ -657,8 +657,8 @@ static irqreturn_t sun4i_can_interrupt(int irq, void *dev_id)
 	u8 isrc, status;
 	int n = 0;
 
-	while ((isrc = readl(priv->base + SUN4I_REG_INT_ADDR)) &&
-	       (n < SUN4I_CAN_MAX_IRQ)) {
+	while ((n < SUN4I_CAN_MAX_IRQ) &&
+	       (isrc = readl(priv->base + SUN4I_REG_INT_ADDR))) {
 		n++;
 		status = readl(priv->base + SUN4I_REG_STA_ADDR);
 

---
base-commit: 5442a9da69789741bfda39f34ee7f69552bf0c56
change-id: 20251116-sun4i-fix-loop-f265621b6a99

Best regards,
--  
Marc Kleine-Budde <mkl at pengutronix.de>