[PATCH 3/3] dts: reset: add support for cix sky1 resets

[Krzysztof Kozlowski]

On 07/11/2025 04:38, Gary Yang wrote:
> There are two reset conctrollers on Cix Sky1 Soc.
> One is located in S0 domain, and the other is located
> in S5 domain.
> 
> Signed-off-by: Gary Yang <gary.yang at cixtech.com>
> ---
>  arch/arm64/boot/dts/cix/sky1.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)


Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching. For bindings, the preferred subjects are
explained here:
https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters

Please start paying attention to this.

> 
> diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
> index d21387224e79..fc68734f37c2 100644
> --- a/arch/arm64/boot/dts/cix/sky1.dtsi
> +++ b/arch/arm64/boot/dts/cix/sky1.dtsi
> @@ -348,6 +348,13 @@ i3c1: i3c at 4100000 {
>  			status = "disabled";
>  		};
>  
> +		src_fch: reset-controller at 4160000 {
> +			compatible = "cix,sky1-rst-fch", "syscon";
> +			reg = <0x0 0x04160000 0x0 0x90>;
> +			#reset-cells = <1>;
> +			status = "okay";
Why?

> +		};
> +
>  		iomuxc: pinctrl at 4170000 {
>  			compatible = "cix,sky1-iomuxc";
>  			reg = <0x0 0x04170000 0x0 0x1000>;
> @@ -568,6 +575,13 @@ ppi_partition1: interrupt-partition-1 {
>  			};
>  		};
>  
> +		src: reset-controller at 16000000 {
> +			compatible = "cix,sky1-rst", "syscon";
> +			reg = <0x0 0x16000000 0x0 0x1000>;
> +			#reset-cells = <1>;
> +			status = "okay";

No, really, why?


Best regards,
Krzysztof