[PATCH 4/6] arm64: dts: rockchip: add px30-cobra base dtsi and board variants

[Diederik de Haas]

Hi,

On Thu May 8, 2025 at 5:09 PM CEST, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at cherry.de>
>
> Cobra are Touchscreen devices built around the PX30 SoC using
> a variety of display options.
>
> The devices feature an EMMC, network port, usb host + OTG ports and
> a 720x1280 display with a touchscreen.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner at cherry.de>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   4 +
>  .../rockchip/px30-cobra-ltk050h3146w-a2.dts   |  39 ++
>  .../dts/rockchip/px30-cobra-ltk050h3146w.dts  |  39 ++
>  .../dts/rockchip/px30-cobra-ltk050h3148w.dts  |  39 ++
>  .../dts/rockchip/px30-cobra-ltk500hd1829.dts  |  58 ++
>  arch/arm64/boot/dts/rockchip/px30-cobra.dtsi  | 570 ++++++++++++++++++
>  6 files changed, 749 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w-a2.dts
>  create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3146w.dts
>  create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra-ltk050h3148w.dts
>  create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra-ltk500hd1829.dts
>  create mode 100644 arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
>
> <snip>
>
> diff --git a/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
> new file mode 100644
> index 000000000000..92066cbc1a70
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/px30-cobra.dtsi
> @@ -0,0 +1,570 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2025 Cherry Embedded Solutions GmbH
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "px30.dtsi"
> +
> +/ {
> +	aliases {
> +		mmc0 = &emmc;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial5:115200n8";
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		power-supply = <&vcc5v0_sys>;
> +		pwms = <&pwm0 0 25000 0>;
> +	};
> +
> +	beeper {
> +		compatible = "pwm-beeper";
> +		pwms = <&pwm1 0 1000 0>;
> +	};
> +
> +	emmc_pwrseq: emmc-pwrseq {
> +		compatible = "mmc-pwrseq-emmc";
> +		pinctrl-0 = <&emmc_reset>;
> +		pinctrl-names = "default";
> +		reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		led-0 {
> +			color = <LED_COLOR_ID_BLUE>;
> +			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
> +			label = "heartbeat";
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	pwm-leds {
> +		compatible = "pwm-leds";
> +
> +		ring_red: led-0 {
> +			color = <LED_COLOR_ID_RED>;
> +			default-state = "off";
> +			label = "ring_red";
> +			pwms = <&pwm5 0 1000000 0>;
> +			max-brightness = <255>;
> +		};
> +
> +		ring_green: led-1 {
> +			color = <LED_COLOR_ID_GREEN>;
> +			default-state = "off";
> +			label = "ring_green";
> +			pwms = <&pwm6 0 1000000 0>;
> +			max-brightness = <255>;
> +		};
> +
> +		ring_blue: led-2 {
> +			color = <LED_COLOR_ID_BLUE>;
> +			default-state = "off";
> +			label = "ring_blue";
> +			pwms = <&pwm7 0 1000000 0>;
> +			max-brightness = <255>;
> +		};
> +	};
> +
> +	/* also named 5V_Q7 in schematics */
> +	vcc5v0_sys: regulator-vccsys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +};
> +
> +&cpu0 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu2 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu3 {
> +	cpu-supply = <&vdd_arm>;
> +};
> +
> +&display_subsystem {
> +	status = "okay";
> +};
> +
> +&dsi_dphy {
> +	status = "okay";
> +};
> +
> +&emmc {
> +	bus-width = <8>;
> +	cap-mmc-highspeed;
> +	/*
> +	 * For hs200 support, U-Boot would have to set the RK809 DCDC4
> +	 * rail to 1.8V from the default of 3.0V. It doesn't do that on
> +	 * devices out in the field, so disable hs200.
> +	 * mmc-hs200-1_8v;
> +	 */
> +	mmc-pwrseq = <&emmc_pwrseq>;
> +	non-removable;
> +	vmmc-supply = <&vcc_3v3>;
> +	vqmmc-supply = <&vcc_emmc>;
> +	status = "okay";
> +};
> +
> +&gmac {
> +	clock_in_out = "output";
> +	phy-handle = <&dp83825>;
> +	phy-supply = <&vcc_3v3>;
> +	status = "okay";
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_log>;
> +	status = "okay";
> +};
> +
> +/* I2C0 = PMIC, STUSB4500, RTC */
> +&i2c0 {
> +	status = "okay";
> +
> +	rk809: pmic at 20 {
> +		compatible = "rockchip,rk809";
> +		reg = <0x20>;
> +		#clock-cells = <0>;
> +		clock-output-names = "xin32k";
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_int>;
> +		wakeup-source;
> +		rockchip,system-power-controller;

The "rockchip," prefix is not needed and deprecated, so you can drop it.
Same issue is present in patch 6 of this series.

Cheers,
  Diederik
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20250509/f0603c82/attachment.sig>