[PATCH v2 4/4] arm64: dts: ti: k3-j722s-evm: Add overlay for TEVI OV5640

[Kumar, Udit]

On 5/8/2025 9:21 PM, Yemike Abhilash Chandra wrote:
> From: Vaishnav Achath <vaishnav.a at ti.com>
>
> TechNexion TEVI OV5640 camera is a 5MP camera that can be used with
> J722S EVM through the 22-pin CSI-RX connector. Add a reference overlay
> for quad TEVI OV5640 modules on J722S EVM.
>
> Signed-off-by: Vaishnav Achath <vaishnav.a at ti.com>
> Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra at ti.com>
> ---
> [..]
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso
> new file mode 100644
> index 000000000000..55e767a020d9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtso
> @@ -0,0 +1,322 @@
> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> +/*
> + * 4 x TEVI OV5640 MIPI Camera module on RPI camera connector.
> + *
> + * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/

Please check year.

With  that

Reviewed-by: Udit Kumar <u-kumar1 at ti.com>


> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include "k3-pinctrl.h"
> +
> +&{/} {
> +	clk_ov5640_fixed: clock-24000000 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000000>;
> +	};
> +
> +	reg_2p8v: regulator-2p8v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "2P8V";
> +		regulator-min-microvolt = <2800000>;
> +		regulator-max-microvolt = <2800000>;
> +		vin-supply = <&vcc_3v3_exp>;

^^ with change in name of regulator (patch 1/4), you need to change here 
too

Thanks

Udit

> [..]