[PATCH v2 2/4] arm64: dts: ti: k3-am62a-phycore-som: Enable Co-processors

[Daniel Schultz]

On 5/6/25 16:20, Andrew Davis wrote:
> On 5/6/25 8:36 AM, Daniel Schultz wrote:
>> For every remote processor, set up dedicated memory regions and
>> associate the required mailbox channels. Allocate two memory areas
>> per remote core: one 1MB region for vring shared buffers, and
>> another for external memory used by the remote processor for its
>> resource table and trace buffer.
>>
>> Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
>> ---
>>   .../boot/dts/ti/k3-am62a-phycore-som.dtsi     | 96 +++++++++++++++++--
>>   1 file changed, 90 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi 
>> b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
>> index 147d56b87984..049aa358e796 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
>> @@ -59,6 +59,42 @@ linux,cma {
>>               linux,cma-default;
>>           };
>>   +        c7x_0_dma_memory_region: c7x-dma-memory at 99800000 {
>> +            compatible = "shared-dma-pool";
>> +            reg = <0x00 0x99800000 0x00 0x100000>;
>> +            no-map;
>> +        };
>> +
>> +        c7x_0_memory_region: c7x-memory at 99900000 {
>> +            compatible = "shared-dma-pool";
>> +            reg = <0x00 0x99900000 0x00 0xf00000>;
>> +            no-map;
>> +        };
>> +
>> +        mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9b800000 {
>> +            compatible = "shared-dma-pool";
>> +            reg = <0x00 0x9b800000 0x00 0x100000>;
>> +            no-map;
>> +        };
>> +
>> +        mcu_r5fss0_core0_memory_region: r5f-dma-memory at 9b900000 {
>> +            compatible = "shared-dma-pool";
>> +            reg = <0x00 0x9b900000 0x00 0xf00000>;
>> +            no-map;
>> +        };
>> +
>> +        wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9c800000 {
>> +            compatible = "shared-dma-pool";
>> +            reg = <0x00 0x9c800000 0x00 0x100000>;
>> +            no-map;
>> +        };
>> +
>> +        wkup_r5fss0_core0_memory_region: r5f-dma-memory at 9c900000 {
>> +            compatible = "shared-dma-pool";
>> +            reg = <0x00 0x9c900000 0x00 0xf00000>;
>> +            no-map;
>> +        };
>> +
>>           secure_tfa_ddr: tfa at 9e780000 {
>>               reg = <0x00 0x9e780000 0x00 0x80000>;
>>               alignment = <0x1000>;
>> @@ -70,12 +106,6 @@ secure_ddr: optee at 9e800000 {
>>               alignment = <0x1000>;
>>               no-map;
>>           };
>> -
>> -        wkup_r5fss0_core0_memory_region: r5f-dma-memory at 9c900000 {
>> -            compatible = "shared-dma-pool";
>> -            reg = <0x00 0x9c900000 0x00 0x01e00000>;
>> -            no-map;
>> -        };
>>       };
>>         vcc_5v0_som: regulator-vcc-5v0-som {
>> @@ -170,6 +200,13 @@ AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) 
>> EXTINTn */
>>       };
>>   };
>>   +&c7x_0 {
>> +    mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
>> +    memory-region = <&c7x_0_dma_memory_region>,
>> +            <&c7x_0_memory_region>;
>> +    status = "okay";
>> +};
>> +
>>   &cpsw3g {
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&main_rgmii1_pins_default>;
>> @@ -200,6 +237,33 @@ &fss {
>>       status = "okay";
>>   };
>>   +&mailbox0_cluster0 {
>> +    status = "okay";
>> +
>> +    mbox_r5_0: mbox-r5-0 {
>> +        ti,mbox-rx = <0 0 0>;
>> +        ti,mbox-tx = <1 0 0>;
>> +    };
>> +};
>> +
>> +&mailbox0_cluster1 {
>> +    status = "okay";
>> +
>> +    mbox_c7x_0: mbox-c7x-0 {
>> +        ti,mbox-rx = <0 0 0>;
>> +        ti,mbox-tx = <1 0 0>;
>> +    };
>> +};
>> +
>> +&mailbox0_cluster2 {
>> +    status = "okay";
>> +
>> +    mbox_mcu_r5_0: mbox-mcu-r5-0 {
>> +        ti,mbox-rx = <0 0 0>;
>> +        ti,mbox-tx = <1 0 0>;
>> +    };
>> +};
>> +
>>   &main_i2c0 {
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&main_i2c0_pins_default>;
>> @@ -315,6 +379,16 @@ &main_pktdma {
>>       bootph-all;
>>   };
>>   +&mcu_r5fss0 {
>> +    status = "okay";
>> +};
>> +
>> +&mcu_r5fss0_core0 {
>> +    mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
>
> These mboxes items should be combined as they are both part of a single
> two-element item, not a big deal for now as the output DTB is the same,

Yes, I can do that. Heads up this is copied from the recent k3-am62a7-sk 
update. You might wanna consider updating this board too.

- Daniel

>
> Reviewed-by: Andrew Davis <afd at ti.com>
>
>> +    memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
>> +            <&mcu_r5fss0_core0_memory_region>;
>> +};
>> +
>>   &ospi0 {
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&ospi0_pins_default>;
>> @@ -343,3 +417,13 @@ &sdhci0 {
>>       bootph-all;
>>       status = "okay";
>>   };
>> +
>> +&wkup_r5fss0 {
>> +    status = "okay";
>> +};
>> +
>> +&wkup_r5fss0_core0 {
>> +    mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
>> +    memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
>> +            <&wkup_r5fss0_core0_memory_region>;
>> +};