On 5/6/25 8:36 AM, Daniel Schultz wrote:
> For every remote processor, set up dedicated memory regions and
> associate the required mailbox channels. Allocate two memory areas
> per remote core: one 1MB region for vring shared buffers, and
> another for external memory used by the remote processor for its
> resource table and trace buffer.
>
> Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
> ---
> .../boot/dts/ti/k3-am62a-phycore-som.dtsi | 96 +++++++++++++++++--
> 1 file changed, 90 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
> index 147d56b87984..049aa358e796 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
> @@ -59,6 +59,42 @@ linux,cma {
> linux,cma-default;
> };
>
> + c7x_0_dma_memory_region: c7x-dma-memory at 99800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x99800000 0x00 0x100000>;
> + no-map;
> + };
> +
> + c7x_0_memory_region: c7x-memory at 99900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x99900000 0x00 0xf00000>;
> + no-map;
> + };
> +
> + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9b800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9b800000 0x00 0x100000>;
> + no-map;
> + };
> +
> + mcu_r5fss0_core0_memory_region: r5f-dma-memory at 9b900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9b900000 0x00 0xf00000>;
> + no-map;
> + };
> +
> + wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9c800000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9c800000 0x00 0x100000>;
> + no-map;
> + };
> +
> + wkup_r5fss0_core0_memory_region: r5f-dma-memory at 9c900000 {
> + compatible = "shared-dma-pool";
> + reg = <0x00 0x9c900000 0x00 0xf00000>;
> + no-map;
> + };
> +
> secure_tfa_ddr: tfa at 9e780000 {
> reg = <0x00 0x9e780000 0x00 0x80000>;
> alignment = <0x1000>;
> @@ -70,12 +106,6 @@ secure_ddr: optee at 9e800000 {
> alignment = <0x1000>;
> no-map;
> };
> -
> - wkup_r5fss0_core0_memory_region: r5f-dma-memory at 9c900000 {
> - compatible = "shared-dma-pool";
> - reg = <0x00 0x9c900000 0x00 0x01e00000>;
> - no-map;
> - };
> };
>
> vcc_5v0_som: regulator-vcc-5v0-som {
> @@ -170,6 +200,13 @@ AM62AX_IOPAD(0x1f4, PIN_INPUT, 0) /* (D16) EXTINTn */
> };
> };
>
> +&c7x_0 {
> + mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
> + memory-region = <&c7x_0_dma_memory_region>,
> + <&c7x_0_memory_region>;
> + status = "okay";
> +};
> +
> &cpsw3g {
> pinctrl-names = "default";
> pinctrl-0 = <&main_rgmii1_pins_default>;
> @@ -200,6 +237,33 @@ &fss {
> status = "okay";
> };
>
> +&mailbox0_cluster0 {
> + status = "okay";
> +
> + mbox_r5_0: mbox-r5-0 {
> + ti,mbox-rx = <0 0 0>;
> + ti,mbox-tx = <1 0 0>;
> + };
> +};
> +
> +&mailbox0_cluster1 {
> + status = "okay";
> +
> + mbox_c7x_0: mbox-c7x-0 {
> + ti,mbox-rx = <0 0 0>;
> + ti,mbox-tx = <1 0 0>;
> + };
> +};
> +
> +&mailbox0_cluster2 {
> + status = "okay";
> +
> + mbox_mcu_r5_0: mbox-mcu-r5-0 {
> + ti,mbox-rx = <0 0 0>;
> + ti,mbox-tx = <1 0 0>;
> + };
> +};
> +
> &main_i2c0 {
> pinctrl-names = "default";
> pinctrl-0 = <&main_i2c0_pins_default>;
> @@ -315,6 +379,16 @@ &main_pktdma {
> bootph-all;
> };
>
> +&mcu_r5fss0 {
> + status = "okay";
> +};
> +
> +&mcu_r5fss0_core0 {
> + mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
These mboxes items should be combined as they are both part of a single
two-element item, not a big deal for now as the output DTB is the same,
Reviewed-by: Andrew Davis <afd at ti.com>
> + memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
> + <&mcu_r5fss0_core0_memory_region>;
> +};
> +
> &ospi0 {
> pinctrl-names = "default";
> pinctrl-0 = <&ospi0_pins_default>;
> @@ -343,3 +417,13 @@ &sdhci0 {
> bootph-all;
> status = "okay";
> };
> +
> +&wkup_r5fss0 {
> + status = "okay";
> +};
> +
> +&wkup_r5fss0_core0 {
> + mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
> + memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
> + <&wkup_r5fss0_core0_memory_region>;
> +};