[PATCH v3 07/10] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs

[Konrad Dybcio]

On 3/24/25 9:18 PM, Melody Olvera wrote:
> From: Wesley Cheng <quic_wcheng at quicinc.com>
> 
> Add the base USB devicetree definitions for SM8750 platforms.  The overall
> chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
> (rev. v8) and M31 eUSB2 PHY.  The major difference for SM8750 is the
> transition to using the M31 eUSB2 PHY compared to previous SoCs.
> 
> Enable USB support on SM8750 MTP and QRD variants. SM8750 has a QMP combo
> PHY for the SSUSB path, and a M31 eUSB2 PHY for the HSUSB path.
> 
> Signed-off-by: Wesley Cheng <quic_wcheng at quicinc.com>
> Signed-off-by: Melody Olvera <quic_molvera at quicinc.com>
> ---

[...]

> +		usb_1: usb at a6f8800 {
> +			compatible = "qcom,sm8750-dwc3", "qcom,dwc3";
> +			reg = <0x0 0x0a6f8800 0x0 0x400>;
> +
> +			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
> +				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
> +				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
> +				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
> +				 <&tcsrcc TCSR_USB3_CLKREF_EN>;

I believe this belongs to the PHY, but the documentation doesn't make that
very clear..

With that squared out whichever way is correct:

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

Konrad