[PATCH v3 08/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform

[Melody Olvera]

From: Wesley Cheng <quic_wcheng at quicinc.com>

Enable USB support on SM8750 MTP variants.  The current definition will
start the USB controller in peripheral mode by default until
dependencies are added, such as USB role detection.

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Wesley Cheng <quic_wcheng at quicinc.com>
Signed-off-by: Melody Olvera <quic_molvera at quicinc.com>
---
 arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 5d0decd2aa2d0e0849414534cdd504714402458e..3ad417aaaaf46ee007bc4c029fa9e57ac183c075 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -806,3 +806,27 @@ &tlmm {
 &uart7 {
 	status = "okay";
 };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	vdd-supply = <&vreg_l2d_0p88>;
+	vdda12-supply = <&vreg_l3g_1p2>;
+
+	phys = <&pmih0108_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l3g_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p88>;
+
+	status = "okay";
+};

-- 
2.48.1