[PATCH 3/5] arm64: dts: allwinner: a523: Move rgmii0 pins to correct location

[Andre Przywara]

On Fri, 20 Jun 2025 01:30:05 +0800
Chen-Yu Tsai <wens at kernel.org> wrote:

> From: Chen-Yu Tsai <wens at csie.org>
> 
> Nodes are supposed to be sorted by address, or if no addresses
> apply, by node name. The rgmii0 pins are out of order, possibly
> due to multiple patches adding pin mux settings conflicting.
> 
> Move the rgmii0 pins to the correct location.
> 
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Cheers,
Andre

> ---
>  .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 20 +++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> index 458d7ecedacd..30613a0b1124 100644
> --- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> @@ -126,16 +126,6 @@ pio: pinctrl at 2000000 {
>  			interrupt-controller;
>  			#interrupt-cells = <3>;
>  
> -			rgmii0_pins: rgmii0-pins {
> -				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
> -				       "PH5", "PH6", "PH7", "PH9", "PH10",
> -				       "PH14", "PH15", "PH16", "PH17", "PH18";
> -				allwinner,pinmux = <5>;
> -				function = "emac0";
> -				drive-strength = <40>;
> -				bias-disable;
> -			};
> -
>  			mmc0_pins: mmc0-pins {
>  				pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
>  				allwinner,pinmux = <2>;
> @@ -163,6 +153,16 @@ mmc2_pins: mmc2-pins {
>  				bias-pull-up;
>  			};
>  
> +			rgmii0_pins: rgmii0-pins {
> +				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
> +				       "PH5", "PH6", "PH7", "PH9", "PH10",
> +				       "PH14", "PH15", "PH16", "PH17", "PH18";
> +				allwinner,pinmux = <5>;
> +				function = "emac0";
> +				drive-strength = <40>;
> +				bias-disable;
> +			};
> +
>  			uart0_pb_pins: uart0-pb-pins {
>  				pins = "PB9", "PB10";
>  				allwinner,pinmux = <2>;