[PATCH 3/5] arm64: dts: allwinner: a523: Move rgmii0 pins to correct location

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens at csie.org>

Nodes are supposed to be sorted by address, or if no addresses
apply, by node name. The rgmii0 pins are out of order, possibly
due to multiple patches adding pin mux settings conflicting.

Move the rgmii0 pins to the correct location.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 458d7ecedacd..30613a0b1124 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -126,16 +126,6 @@ pio: pinctrl at 2000000 {
 			interrupt-controller;
 			#interrupt-cells = <3>;
 
-			rgmii0_pins: rgmii0-pins {
-				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
-				       "PH5", "PH6", "PH7", "PH9", "PH10",
-				       "PH14", "PH15", "PH16", "PH17", "PH18";
-				allwinner,pinmux = <5>;
-				function = "emac0";
-				drive-strength = <40>;
-				bias-disable;
-			};
-
 			mmc0_pins: mmc0-pins {
 				pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
 				allwinner,pinmux = <2>;
@@ -163,6 +153,16 @@ mmc2_pins: mmc2-pins {
 				bias-pull-up;
 			};
 
+			rgmii0_pins: rgmii0-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH9", "PH10",
+				       "PH14", "PH15", "PH16", "PH17", "PH18";
+				allwinner,pinmux = <5>;
+				function = "emac0";
+				drive-strength = <40>;
+				bias-disable;
+			};
+
 			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB9", "PB10";
 				allwinner,pinmux = <2>;
-- 
2.39.5