[PATCH 10/12] dt-bindings: samsung,mipi-dsim: document exynos7870 DSIM compatible
Kaustabh Chakraborty
kauschluss at disroot.org
Wed Jun 18 07:27:17 PDT 2025
On 2025-06-18 10:00, Krzysztof Kozlowski wrote:
> On 12/06/2025 17:18, Kaustabh Chakraborty wrote:
>> Add compatible string for Exynos7870 DSIM bridge controller. The
>> devicetree node requires four clock sources, named:
>> - bus_clk
>> - phyclk_mipidphy0_bitclkdiv8
>> - phyclk_mipidphy0_rxclkesc0
>> - sclk_mipi
>>
>> Signed-off-by: Kaustabh Chakraborty <kauschluss at disroot.org>
>> ---
>> .../bindings/display/bridge/samsung,mipi-dsim.yaml | 26 ++++++++++++++++++++++
>> 1 file changed, 26 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
>> index 1acad99f396527192b6853f0096cfb8ae5669e6b..887f3ba1edd24a177a766b1b523d0c197ff1123a 100644
>> --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
>> +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
>> @@ -24,6 +24,7 @@ properties:
>> - samsung,exynos5410-mipi-dsi
>> - samsung,exynos5422-mipi-dsi
>> - samsung,exynos5433-mipi-dsi
>> + - samsung,exynos7870-mipi-dsi
>> - fsl,imx8mm-mipi-dsim
>> - fsl,imx8mp-mipi-dsim
>> - items:
>> @@ -144,6 +145,31 @@ required:
>>
>> allOf:
>> - $ref: ../dsi-controller.yaml#
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: samsung,exynos7870-mipi-dsi
>> +
>> + then:
>> + properties:
>> + clocks:
>> + minItems: 4
>
> maxItems: 4
Will replace. maxItems == minItems implicit if maxItems present and
minItems absent.
>
>> +
>> + clock-names:
>> + items:
>> + - const: bus_clk
>> + - const: phyclk_mipidphy0_bitclkdiv8
>> + - const: phyclk_mipidphy0_rxclkesc0
>> + - const: sclk_mipi
>
> Does any existing driver code actually depends on the names? If not, we
> switched in Samsung in general to names matching the input or the
> function, not the name of provider. bus, bit (or bitdiv?), rx or esc0, sclk
Yeah, Exynos5433 uses it. Code is here [1].
Though, I could get around this if you would like to. Would need to add
a few more patches.
PS: bitdiv8 should actually be byte. bit clock frequency used in data
transmission divided by 8 covers a byte.
[1] https://elixir.bootlin.com/linux/v6.16-rc2/source/drivers/gpu/drm/bridge/samsung-dsim.c#L227
>
>
> Best regards,
> Krzysztof
More information about the linux-arm-kernel
mailing list