[PATCH v2 1/3] dt-bindings: remoteproc: fsl,imx-rproc: Add support for i.MX95

[Peng Fan]

Hi Daniel,

On Mon, Jun 16, 2025 at 04:07:02PM +0300, Daniel Baluta wrote:
>On Fri, Jun 6, 2025 at 4:57???AM Peng Fan (OSS) <peng.fan at oss.nxp.com> wrote:
>>
>> From: Peng Fan <peng.fan at nxp.com>
>>
>> i.MX95 has a System Manager(SM) core runs the System Control Management
>> Interface(SCMI) firmware. Vendor extenions are implemented in the
>> firmware, Logical Machine Management(LMM) protocol to manage
>> Logical Machines and CPU protocol to manage cores. The documentation
>> could be found in file drivers/firmware/arm_scmi/vendors/imx/imx95.rst.
>>
>> Add below to support i.MX95
>>  - compatible string for i.MX95 M7
>>  - fsl,lmm-id to indicate the LMM ID of M7 LM
>>  - fsl,cpu-id to indicate the CPU ID of M7
>>
>> Signed-off-by: Peng Fan <peng.fan at nxp.com>
>> ---
>>  .../bindings/remoteproc/fsl,imx-rproc.yaml         | 27 ++++++++++++++++++++++
>>  1 file changed, 27 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
>> index 57d75acb0b5e52ca49d1361176fdebc18a0bf7a2..a3ffab60df52be6f1d7cf4846ca5ba1c40f03bde 100644
>> --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
>> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
>> @@ -28,6 +28,7 @@ properties:
>>        - fsl,imx8qxp-cm4
>>        - fsl,imx8ulp-cm33
>>        - fsl,imx93-cm33
>> +      - fsl,imx95-cm7
>>
>>    clocks:
>>      maxItems: 1
>> @@ -68,6 +69,12 @@ properties:
>>        Indicate whether need to load the default firmware and start the remote
>>        processor automatically.
>>
>> +  fsl,cpu-id:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description:
>> +      This property is to specify the CPU ID of the remote processor
>> +      in SoC which supports System Manager
>> +
>>    fsl,entry-address:
>>      $ref: /schemas/types.yaml#/definitions/uint32
>>      description:
>> @@ -78,6 +85,12 @@ properties:
>>      description:
>>        Phandle to IOMUXC GPR block which provide access to CM7 CPUWAIT bit.
>>
>> +  fsl,lmm-id:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description:
>> +      This property is to specify the Logical Machine ID of the remote processor
>> +      in SoC which supports System Manager
>> +
>>    fsl,resource-id:
>>      $ref: /schemas/types.yaml#/definitions/uint32
>>      description:
>> @@ -114,6 +127,20 @@ allOf:
>>        properties:
>>          power-domains: false
>>
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: fsl,imx95-cm7
>> +    then:
>> +      required:
>> +        - fsl,lmm-id
>> +        - fsl,cpu-id
>> +    else:
>> +      properties:
>> +        fsl,lmm-id: false
>> +        fsl,cpu-id: false
>
>Hi Peng,
>
>Can you remind me why do we need the else branch here?
>
>I mean if the compatible is not fsl,imx95-cm7 then the properties
>fsl,lmm-id and fsl,cpu-id are not required and I think that's fine.

It is not required, but we should also block others wrongly add
the properties. Such as dt-schema should report error if user wrongly add
these properties in DTS.

DT maintainers may help comment more.

Thanks,
Peng