[PATCH v2 1/3] dt-bindings: remoteproc: fsl,imx-rproc: Add support for i.MX95

Daniel Baluta daniel.baluta at gmail.com
Mon Jun 16 06:07:02 PDT 2025


On Fri, Jun 6, 2025 at 4:57 AM Peng Fan (OSS) <peng.fan at oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan at nxp.com>
>
> i.MX95 has a System Manager(SM) core runs the System Control Management
> Interface(SCMI) firmware. Vendor extenions are implemented in the
> firmware, Logical Machine Management(LMM) protocol to manage
> Logical Machines and CPU protocol to manage cores. The documentation
> could be found in file drivers/firmware/arm_scmi/vendors/imx/imx95.rst.
>
> Add below to support i.MX95
>  - compatible string for i.MX95 M7
>  - fsl,lmm-id to indicate the LMM ID of M7 LM
>  - fsl,cpu-id to indicate the CPU ID of M7
>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  .../bindings/remoteproc/fsl,imx-rproc.yaml         | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> index 57d75acb0b5e52ca49d1361176fdebc18a0bf7a2..a3ffab60df52be6f1d7cf4846ca5ba1c40f03bde 100644
> --- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
> @@ -28,6 +28,7 @@ properties:
>        - fsl,imx8qxp-cm4
>        - fsl,imx8ulp-cm33
>        - fsl,imx93-cm33
> +      - fsl,imx95-cm7
>
>    clocks:
>      maxItems: 1
> @@ -68,6 +69,12 @@ properties:
>        Indicate whether need to load the default firmware and start the remote
>        processor automatically.
>
> +  fsl,cpu-id:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      This property is to specify the CPU ID of the remote processor
> +      in SoC which supports System Manager
> +
>    fsl,entry-address:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      description:
> @@ -78,6 +85,12 @@ properties:
>      description:
>        Phandle to IOMUXC GPR block which provide access to CM7 CPUWAIT bit.
>
> +  fsl,lmm-id:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      This property is to specify the Logical Machine ID of the remote processor
> +      in SoC which supports System Manager
> +
>    fsl,resource-id:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      description:
> @@ -114,6 +127,20 @@ allOf:
>        properties:
>          power-domains: false
>
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx95-cm7
> +    then:
> +      required:
> +        - fsl,lmm-id
> +        - fsl,cpu-id
> +    else:
> +      properties:
> +        fsl,lmm-id: false
> +        fsl,cpu-id: false

Hi Peng,

Can you remind me why do we need the else branch here?

I mean if the compatible is not fsl,imx95-cm7 then the properties
fsl,lmm-id and fsl,cpu-id are not required and I think that's fine.



More information about the linux-arm-kernel mailing list