[PATCH 8/8] media: imx-mipi-csis: Initial support for multiple output channels

[Laurent Pinchart]

On Tue, Jun 10, 2025 at 11:01:20AM +0200, Alexander Stein wrote:
> Am Montag, 9. Juni 2025, 01:58:40 CEST schrieb Laurent Pinchart:
> > Some CSIS instances feature more than one output channel. Parse the
> > number of channels from the device tree, and update register dumps and
> > event counters accordingly. Support for routing virtual channels and
> > data types to output channels through the subdev internal routing API
> > will come later.
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > ---
> >  drivers/media/platform/nxp/imx-mipi-csis.c | 224 ++++++++++++++-------
> >  1 file changed, 146 insertions(+), 78 deletions(-)
> > 
> > diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
> > index 080e40837463..4cc358d93187 100644
> > --- a/drivers/media/platform/nxp/imx-mipi-csis.c
> > +++ b/drivers/media/platform/nxp/imx-mipi-csis.c
> > @@ -98,12 +98,12 @@
> >  #define MIPI_CSIS_INT_SRC_ODD_AFTER		BIT(28)
> >  #define MIPI_CSIS_INT_SRC_ODD			(0x3 << 28)
> >  #define MIPI_CSIS_INT_SRC_NON_IMAGE_DATA	(0xf << 28)
> 
> As a side note: I just noticed Bits 28-31 are only defined on i.MX7. They
> are reserved on i.MX8M (Mini, Nano, Plus).

They are many bit marked as reserved that are actually implemented. The
CSIS is a big pain point :-(

> > -#define MIPI_CSIS_INT_SRC_FRAME_START		BIT(24)
> > -#define MIPI_CSIS_INT_SRC_FRAME_END		BIT(20)
> > +#define MIPI_CSIS_INT_SRC_FRAME_START(n)	BIT((n) + 24)
> > +#define MIPI_CSIS_INT_SRC_FRAME_END(n)		BIT((n) + 20)
> >  #define MIPI_CSIS_INT_SRC_ERR_SOT_HS(n)		BIT((n) + 16)
> > -#define MIPI_CSIS_INT_SRC_ERR_LOST_FS		BIT(12)
> > -#define MIPI_CSIS_INT_SRC_ERR_LOST_FE		BIT(8)
> > -#define MIPI_CSIS_INT_SRC_ERR_OVER		BIT(4)
> > +#define MIPI_CSIS_INT_SRC_ERR_LOST_FS(n)	BIT((n) + 12)
> > +#define MIPI_CSIS_INT_SRC_ERR_LOST_FE(n)	BIT((n) + 8)
> > +#define MIPI_CSIS_INT_SRC_ERR_OVER(n)		BIT((n) + 4)
> 
> Similar here. Only i.MX7 has the bits for CH1, CH2 and CH3 defined.
> 
> >  #define MIPI_CSIS_INT_SRC_ERR_WRONG_CFG		BIT(3)
> >  #define MIPI_CSIS_INT_SRC_ERR_ECC		BIT(2)
> >  #define MIPI_CSIS_INT_SRC_ERR_CRC		BIT(1)
> > @@ -205,23 +205,23 @@
> >  /* Debug control register */
> >  #define MIPI_CSIS_DBG_CTRL			0xc0
> >  #define MIPI_CSIS_DBG_INTR_MSK			0xc4
> > -#define MIPI_CSIS_DBG_INTR_MSK_DT_NOT_SUPPORT	BIT(25)
> > -#define MIPI_CSIS_DBG_INTR_MSK_DT_IGNORE	BIT(24)
> > -#define MIPI_CSIS_DBG_INTR_MSK_ERR_FRAME_SIZE	BIT(20)
> > -#define MIPI_CSIS_DBG_INTR_MSK_TRUNCATED_FRAME	BIT(16)
> > -#define MIPI_CSIS_DBG_INTR_MSK_EARLY_FE		BIT(12)
> > -#define MIPI_CSIS_DBG_INTR_MSK_EARLY_FS		BIT(8)
> > -#define MIPI_CSIS_DBG_INTR_MSK_CAM_VSYNC_FALL	BIT(4)
> > -#define MIPI_CSIS_DBG_INTR_MSK_CAM_VSYNC_RISE	BIT(0)
> > +#define MIPI_CSIS_DBG_INTR_MSK_DT_NOT_SUPPORT		BIT(25)
> > +#define MIPI_CSIS_DBG_INTR_MSK_DT_IGNORE		BIT(24)
> > +#define MIPI_CSIS_DBG_INTR_MSK_ERR_FRAME_SIZE(n)	BIT((n) + 20)
> > +#define MIPI_CSIS_DBG_INTR_MSK_TRUNCATED_FRAME(n)	BIT((n) + 16)
> > +#define MIPI_CSIS_DBG_INTR_MSK_EARLY_FE(n)		BIT((n) + 12)
> > +#define MIPI_CSIS_DBG_INTR_MSK_EARLY_FS(n)		BIT((n) + 8)
> > +#define MIPI_CSIS_DBG_INTR_MSK_CAM_VSYNC_FALL(n)	BIT((n) + 4)
> > +#define MIPI_CSIS_DBG_INTR_MSK_CAM_VSYNC_RISE(n)	BIT((n) + 0)
> >  #define MIPI_CSIS_DBG_INTR_SRC			0xc8
> > -#define MIPI_CSIS_DBG_INTR_SRC_DT_NOT_SUPPORT	BIT(25)
> > -#define MIPI_CSIS_DBG_INTR_SRC_DT_IGNORE	BIT(24)
> > -#define MIPI_CSIS_DBG_INTR_SRC_ERR_FRAME_SIZE	BIT(20)
> > -#define MIPI_CSIS_DBG_INTR_SRC_TRUNCATED_FRAME	BIT(16)
> > -#define MIPI_CSIS_DBG_INTR_SRC_EARLY_FE		BIT(12)
> > -#define MIPI_CSIS_DBG_INTR_SRC_EARLY_FS		BIT(8)
> > -#define MIPI_CSIS_DBG_INTR_SRC_CAM_VSYNC_FALL	BIT(4)
> > -#define MIPI_CSIS_DBG_INTR_SRC_CAM_VSYNC_RISE	BIT(0)
> > +#define MIPI_CSIS_DBG_INTR_SRC_DT_NOT_SUPPORT		BIT(25)
> > +#define MIPI_CSIS_DBG_INTR_SRC_DT_IGNORE		BIT(24)
> > +#define MIPI_CSIS_DBG_INTR_SRC_ERR_FRAME_SIZE(n)	BIT((n) + 20)
> > +#define MIPI_CSIS_DBG_INTR_SRC_TRUNCATED_FRAME(n)	BIT((n) + 16)
> > +#define MIPI_CSIS_DBG_INTR_SRC_EARLY_FE(n)		BIT((n) + 12)
> > +#define MIPI_CSIS_DBG_INTR_SRC_EARLY_FS(n)		BIT((n) + 8)
> > +#define MIPI_CSIS_DBG_INTR_SRC_CAM_VSYNC_FALL(n)	BIT((n) + 4)
> > +#define MIPI_CSIS_DBG_INTR_SRC_CAM_VSYNC_RISE(n)	BIT((n) + 0)
> 
> Out of curiosity: Where do these bits come from? I can't find them in RM.

They are documented in the i.MX7D RM, and they appear to be implemented
on the i.MX8MP as the interrupts fire in the expected way.

> > [snip]

-- 
Regards,

Laurent Pinchart