[PATCH 7/8] arm64: dts: imx8mp: Specify the number of channels for CSI-2 receivers

[Laurent Pinchart]

The CSI-2 receivers in the i.MX8MP have 3 output channels. Specify this
in the device tree, to enable support for more than one channel in
drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 95b3f250d363..c409a1d1e851 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1767,6 +1767,7 @@ mipi_csi_0: csi at 32e40000 {
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
 							 <&clk IMX8MP_CLK_24M>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+				fsl,num-channels = <3>;
 				status = "disabled";
 
 				ports {
@@ -1802,6 +1803,7 @@ mipi_csi_1: csi at 32e50000 {
 				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_250M>,
 							 <&clk IMX8MP_CLK_24M>;
 				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+				fsl,num-channels = <3>;
 				status = "disabled";
 
 				ports {
-- 
Regards,

Laurent Pinchart