[PATCH 2/6] arm64: dts: imx93: remove eee-broken-1000t for eqos node

[Frank Li]

From: Clark Wang <xiaoning.wang at nxp.com>

The "eee-broken-1000t" was added on 8mm for FEC to avoid issue of ptp sync.
EQoS haven't such issue. So, remove this for EQoS phys.

Signed-off-by: Clark Wang <xiaoning.wang at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts | 1 -
 arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts   | 1 -
 2 files changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index 8491eb53120e6..a6ebeb642eb65 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -217,7 +217,6 @@ mdio {
 
 		ethphy1: ethernet-phy at 1 {
 			reg = <1>;
-			eee-broken-1000t;
 			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <80000>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index acbd981ba548a..cceca130c5b4e 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -184,7 +184,6 @@ mdio {
 		ethphy1: ethernet-phy at 1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
-			eee-broken-1000t;
 			reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <80000>;
-- 
2.34.1