[PATCH 2/4] thermal: qoriq: add i.MX93 TMU support

[Krzysztof Kozlowski]

On 29/07/2025 04:40, Jacky Bai wrote:
> The TMU used on i.MX93 need some speccial handling and workaround to be
> done even the revision info read from the ID register is the same as
> Qoriq platform. Add i.MX93 compatible string and corresponding code for it.
> 
> Signed-off-by: Alice Guo <alice.guo at nxp.com>
> Signed-off-by: Jacky Bai <ping.bai at nxp.com>
> ---
>  drivers/thermal/qoriq_thermal.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
> index 01b58be0dcc6..fc1bf102350d 100644
> --- a/drivers/thermal/qoriq_thermal.c
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: GPL-2.0
>  //
>  // Copyright 2016 Freescale Semiconductor, Inc.
> +// Copyright 2022-2025 NXP
>  
>  #include <linux/clk.h>
>  #include <linux/err.h>
> @@ -24,9 +25,11 @@
>  #define TMTMIR_DEFAULT	0x0000000f
>  #define TIER_DISABLE	0x0
>  #define TEUMR0_V2		0x51009c00
> +#define TEUMR0_V21		0x55010c00
>  #define TMSARA_V2		0xe
>  #define TMU_VER1		0x1
>  #define TMU_VER2		0x2
> +#define TMU_VER93		0x3
>  
>  #define REGS_TMR	0x000	/* Mode Register */
>  #define TMR_DISABLE	0x0
> @@ -232,6 +235,9 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
>  
>  	if (data->ver == TMU_VER1) {
>  		regmap_write(data->regmap, REGS_TMTMIR, TMTMIR_DEFAULT);
> +	} else if (data->ver == TMU_VER93) {
> +		regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT);
> +		regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V21);
>  	} else {
>  		regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT);
>  		regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2);
> @@ -319,6 +325,9 @@ static int qoriq_tmu_probe(struct platform_device *pdev)
>  
>  	data->ver = (ver >> 8) & 0xff;
>  
> +	if (of_find_compatible_node(NULL, NULL, "fsl,imx93-tmu"))
> +		data->ver = TMU_VER93;

No, you have driver match data for this.

Anyway, are you sure devices are compatible how you expressed in the
bindings?

> +
>  	qoriq_tmu_init_device(data);	/* TMU initialization */
>  
>  	ret = qoriq_tmu_calibration(dev, data);	/* TMU calibration */
> @@ -379,6 +388,7 @@ static DEFINE_SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
>  static const struct of_device_id qoriq_tmu_match[] = {
>  	{ .compatible = "fsl,qoriq-tmu", },
>  	{ .compatible = "fsl,imx8mq-tmu", },
> +	{ .compatible = "fsl,imx93-tmu", },

Otherwise I claim devices are compatible and this should be dropped.



Best regards,
Krzysztof