[PATCH v5 0/2] Adding device tree and binding for NVIDIA GB200-UT3.0b

Sun Jul 20 16:06:54 PDT 2025

On Fri, 18 Jul 2025 16:11:16 -0700, Donald Shannon wrote:
> Patch 1 adds the binding for the NVIDIA GB200-UT3.0b platform.
> Patch 2 adds the device tree for the NVIDIA GB200-UT3.0b platform.
> 
> This is an Aspeed AST2600 based unit testing platform for GB200.
> UT3.0b is different than nvidia-gb200nvl-bmc due to networking topology
> differences, additional gpio expanders, and voltage regulator gating
> some devices.
> 
> Reference to Ast2600 SOC [1].
> Reference to Blackwell GB200NVL Platform [2].
> 
> Link: https://www.aspeedtech.com/server_ast2600/ [1]
> Link: https://nvdam.widen.net/s/wwnsxrhm2w/blackwell-datasheet-3384703 [2]
> Signed-off-by: Donald Shannon <donalds at nvidia.com>
> ---
> Changes v1 -> v2:
>   - Changed phy-mode to rgmii-id [Lunn]
>   - Removed redundant max-speed for mac0 [Lunn]
>   - Fixed typo from gb200nvl to gb200 in Makefile
> Changes v2 -> v3:
>  - Fixed whitespace issues [Krzysztof]
>  - Fixed schema validation issues from my end ( there are still issues
>  with the aspeed dtsi file that are not related to this new dts)
>  [Herring]
>  - Reordered to follow style guide [Krzysztof]
>  - Removed redundant status okays
>  - Changed vcc to vdd for the power gating on the gpio expanders
> Changes v3 -> v4:
>   - Added changelog [Krzysztof]
>   - Added nvidia,gb200-ut30b board binding [Krzysztof]
>   - Removed unused imports
>   - Reordered a couple other style guide violations
>   - Added back in a couple needed "status okay"s
> Changes v4 -> v5:
>  - Resumed my patch after a pause
>  - Don't plan to make this include of nvidia-gb200nvl-bmc due to some
>  platform differences
>  - Fixed io expanders that weren't gated by the 3.3V standby regulator
>  - Fixed incorrect interrupt pin for one IO expander
>  - Removed some IO expanders and I2C busses
> ---
> 
> Donald Shannon (2):
>   Documentation: devicetree: Add binding for NVIDIA  GB200-UT3.0b
>     platform
>   ARM: dts: aspeed: Add device tree for Nvidia's GB200  UT3.0b platform
>     BMC
> 
>  .../bindings/arm/aspeed/aspeed.yaml           |    1 +
>  arch/arm/boot/dts/aspeed/Makefile             |    1 +
>  .../aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts  | 1027 +++++++++++++++++
>  3 files changed, 1029 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dts
> 
> 
> base-commit: d086c886ceb9f59dea6c3a9dae7eb89e780a20c9
> --
> 2.43.0
> 
> 
> 

My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade

This patch series was applied (using b4) to base:
 Base: using specified base-commit d086c886ceb9f59dea6c3a9dae7eb89e780a20c9

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm/boot/dts/aspeed/' for 20250718231118.3330855-1-donalds at nvidia.com:

arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dtb: kcs at 28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-amd-daytonax.dtb: fan at 15: aspeed,fan-tach-ch: b'\x0f' is not of type 'object', 'integer', 'array', 'boolean', 'null'
	from schema $id: http://devicetree.org/schemas/dt-core.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: timer (arm,armv7-timer): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /sdram at 1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: bus at 1e600000 (aspeed,ast2600-ahbc): compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long
	from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: syscon at 1e6e2000 (aspeed,ast2600-scu): 'smp-memram at 180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^pinctrl-[0-9]+$', '^silicon-id@[0-9a-f]+$'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/syscon at 1e6e2000/smp-memram at 180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/display at 1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: adc at 1e6e9000 (aspeed,ast2600-adc0): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: adc at 1e6e9100 (aspeed,ast2600-adc1): 'interrupts' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: crypto at 1e6fa000 (aspeed,ast2600-acry): 'aspeed,ahbc' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: lpc at 1e789000 (aspeed,ast2600-lpc-v2): reg-io-width: 4 is not of type 'object'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: lpc at 1e789000 (aspeed,ast2600-lpc-v2): lpc-snoop at 80: 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: kcs at 24 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: kcs at 28 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: kcs at 2c (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: kcs at 114 (aspeed,ast2500-kcs-bmc-v2): 'clocks' does not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/lpc at 1e789000/lhc at a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/lpc at 1e789000/ibt at 140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: sdc at 1e740000 (aspeed,ast2600-sd-controller): sdhci at 1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: sdc at 1e740000 (aspeed,ast2600-sd-controller): sdhci at 1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long
	from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/sdc at 1e740000/sdhci at 1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/sdc at 1e740000/sdhci at 1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: fsi at 1e79b000 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/fsi at 1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: fsi at 1e79b100 (aspeed,ast2600-fsi-master): compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long
	from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/fsi at 1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200-ut30b.dtb: /ahb/apb/dma-controller at 1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']