[PATCH] dt-bindings: interrupt-controller: aspeed: Refine AST2700 binding description and example

Krzysztof Kozlowski krzk at kernel.org
Mon Jul 14 00:21:09 PDT 2025


On 14/07/2025 09:17, Ryan Chen wrote:
> - Update block diagram for better readability and accuracy.
> - Clarify the relationship and function of INTC0, INTC1, and the GIC.
> - Documentation and example refine.
> 
> This enhances the documentation quality and helps developers understand
> the interrupt controller hierarchy and usage.

Changing ABI (compatibles) is not enhancing quality and is not explained
here.

> 
> Signed-off-by: Ryan Chen <ryan_chen at aspeedtech.com>
> ---
>  .../aspeed,ast2700-intc.yaml                  | 155 +++++++++++++-----
>  1 file changed, 112 insertions(+), 43 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
> index 55636d06a674..751a07d49c90 100644
> --- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
> +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
> @@ -10,6 +10,33 @@ description:
>    This interrupt controller hardware is second level interrupt controller that
>    is hooked to a parent interrupt controller. It's useful to combine multiple
>    interrupt sources into 1 interrupt to parent interrupt controller.
> +  Depend to which INTC0 or INTC1 used.
> +  INTC0 and INTC1 are two kinds of interrupt controller with enable and raw
> +  status registers for use.
> +  INTC0 is used to assert GIC if interrupt in INTC1 asserted.
> +  INTC1 is used to assert INTC0 if interrupt of modules asserted.
> +  +-----+   +---------+
> +  | GIC |---|  INTC0  |
> +  +-----+   +---------+
> +            +---------+
> +            |         |---module0
> +            | INTC0_0 |---module1
> +            |         |---...
> +            +---------+---module31
> +            |---....  |
> +            +---------+
> +            |         |     +---------+
> +            | INTC0_11| +---| INTC1   |
> +            |         |     +---------+
> +            +---------+     +---------+---module0
> +                            | INTC1_0 |---module1
> +                            |         |---...
> +                            +---------+---module31
> +                            ...
> +                            +---------+---module0
> +                            | INTC1_5 |---module1
> +                            |         |---...
> +                            +---------+---module31
>  
>  maintainers:
>    - Kevin Chen <kevin_chen at aspeedtech.com>
> @@ -17,49 +44,67 @@ maintainers:
>  properties:
>    compatible:
>      enum:
> -      - aspeed,ast2700-intc-ic
> +      - aspeed,ast2700-intc0
> +      - aspeed,ast2700-intc1

No, you cannot change compatibles.

You just rewrite entire bindings just because of wish to "refine"?
Hardware changed? What happened here?

You need to clearly describe ABI impact and reasons, like possible bugs
you address. You cannot just rewrite existing binding into something
entirely else.

Best regards,
Krzysztof



More information about the linux-arm-kernel mailing list