[PATCH 2/4] arm64: dts: ti: k3-am62a-mcu: Add R5F remote proc node

[Hari Nagalla]

On 1/28/25 10:27, Andrew Davis wrote:
>> +    mcu_r5fss0: r5fss at 79000000 {
>> +        compatible = "ti,am62-r5fss";
>> +        #address-cells = <1>;
>> +        #size-cells = <1>;
>> +        ranges = <0x79000000 0x00 0x79000000 0x8000>,
>> +             <0x79020000 0x00 0x79020000 0x8000>;
>> +        power-domains = <&k3_pds 7 TI_SCI_PD_EXCLUSIVE>;
> 
> Newline here.
> 
> Also this should be default "disabled". It can be set to "okay"
> in the board DTS file when the needed mboxes and memory-region
> are set. Speaking of that, where are those patches? This is
> incomplete without them and these nodes will not function.
> Same for the DSP patch.
> 
> Andrew
Yes, by default needs to set the node state to "disabled". This is HW 
description of the wake-up domain components. Memory carve outs and 
mailbox assignments for IPC are a separate patch as it is configurable 
and distro dependent.