[PATCH v7 4/7] PHY: aspeed: Add ASPEED PCIe PHY driver

[Vinod Koul]

On 16-12-25, 09:50, Jacky Chou wrote:
> Introduce support for Aspeed PCIe PHY controller available in
> AST2600/2700.

What is with the uppercase "PHY" in patch title instead of lowercase
'phy' as is the convention

> 
> Signed-off-by: Jacky Chou <jacky_chou at aspeedtech.com>
> ---
>  drivers/phy/Kconfig                  |   1 +
>  drivers/phy/Makefile                 |   1 +
>  drivers/phy/aspeed/Kconfig           |  15 +++
>  drivers/phy/aspeed/Makefile          |   2 +
>  drivers/phy/aspeed/phy-aspeed-pcie.c | 209 +++++++++++++++++++++++++++++++++++
>  5 files changed, 228 insertions(+)
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 678dd0452f0a..f6a8f06fd244 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -103,6 +103,7 @@ config PHY_NXP_PTN3222
>  
>  source "drivers/phy/allwinner/Kconfig"
>  source "drivers/phy/amlogic/Kconfig"
> +source "drivers/phy/aspeed/Kconfig"
>  source "drivers/phy/broadcom/Kconfig"
>  source "drivers/phy/cadence/Kconfig"
>  source "drivers/phy/freescale/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index bfb27fb5a494..18990c87dfb0 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_PHY_AIROHA_PCIE)		+= phy-airoha-pcie.o
>  obj-$(CONFIG_PHY_NXP_PTN3222)		+= phy-nxp-ptn3222.o
>  obj-y					+= allwinner/	\
>  					   amlogic/	\
> +					   aspeed/	\
>  					   broadcom/	\
>  					   cadence/	\
>  					   freescale/	\
> diff --git a/drivers/phy/aspeed/Kconfig b/drivers/phy/aspeed/Kconfig
> new file mode 100644
> index 000000000000..6aeeca84091f
> --- /dev/null
> +++ b/drivers/phy/aspeed/Kconfig
> @@ -0,0 +1,15 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Phy drivers for Aspeed platforms
> +#
> +config PHY_ASPEED_PCIE
> +	tristate "ASPEED PCIe PHY driver"
> +	select GENERIC_PHY
> +	depends on ARCH_ASPEED
> +	default y

NO! why should this driver be default!

> +	help
> +	  This option enables support for the ASPEED PCIe PHY driver.
> +	  The driver provides the necessary interface to control and
> +	  configure the PCIe PHY hardware found on ASPEED SoCs.
> +	  It is required for proper operation of PCIe devices on
> +	  platforms using ASPEED chips.
> \ No newline at end of file

??

> diff --git a/drivers/phy/aspeed/Makefile b/drivers/phy/aspeed/Makefile
> new file mode 100644
> index 000000000000..7203152f44bf
> --- /dev/null
> +++ b/drivers/phy/aspeed/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_PHY_ASPEED_PCIE)		+= phy-aspeed-pcie.o
> \ No newline at end of file

Are we expecting more drivers for aspeed, if not move it to drivers/phy/
once we have couple of them we can add a directory

> diff --git a/drivers/phy/aspeed/phy-aspeed-pcie.c b/drivers/phy/aspeed/phy-aspeed-pcie.c
> new file mode 100644
> index 000000000000..3de43a86ac17
> --- /dev/null
> +++ b/drivers/phy/aspeed/phy-aspeed-pcie.c
> @@ -0,0 +1,209 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2025 Aspeed Technology Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>

why do you need this

> +#include <linux/phy/pcie.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>


Do you need all headers here?

-- 
~Vinod