[PATCH 03/13] arm64: dts: freescale: imx93-phycore-som: Disable LED pull-up

[Frank Li]

On Thu, Apr 10, 2025 at 11:02:41AM +0200, Primoz Fiser wrote:
> There is already an external pull-down resistor on the LED output line.
> It makes no sense to have both pull-down and pull-up resistors enabled
> at the same time. Thus disable the internal pull-down.
>
> Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
> ---

Reviewed-by: Frank Li <Frank.Li at nxp.com>

>  arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> index 442ee067a047..82f680d891c2 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> @@ -196,7 +196,7 @@ MX93_PAD_ENET2_TD2__ENET1_TX_CLK		0x4000050e
>
>  	pinctrl_leds: ledsgrp {
>  		fsl,pins = <
> -			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x31e
> +			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x11e
>  		>;
>  	};
>
> --
> 2.34.1
>