[PATCH 03/13] arm64: dts: freescale: imx93-phycore-som: Disable LED pull-up

[Primoz Fiser]

There is already an external pull-down resistor on the LED output line.
It makes no sense to have both pull-down and pull-up resistors enabled
at the same time. Thus disable the internal pull-down.

Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
---
 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
index 442ee067a047..82f680d891c2 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -196,7 +196,7 @@ MX93_PAD_ENET2_TD2__ENET1_TX_CLK		0x4000050e
 
 	pinctrl_leds: ledsgrp {
 		fsl,pins = <
-			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x31e
+			MX93_PAD_I2C1_SDA__GPIO1_IO01		0x11e
 		>;
 	};
 
-- 
2.34.1