[PATCH v6 11/11] arm64: dts: ti: k3-am64: Reserve timers used by MCU FW

[Judith Mendez]

Hi Andrew,

On 4/7/25 7:35 AM, Andrew Davis wrote:
> On 4/4/25 7:15 PM, Judith Mendez wrote:
>> From: Hari Nagalla <hnagalla at ti.com>
>>
>> AM64x device has 4 R5F cores in the main domain. TI MCU firmware uses
>> main domain timers as tick timers in these firmwares. Hence keep them
>> as reserved in the Linux device tree.
>>
>> Signed-off-by: Hari Nagalla <hnagalla at ti.com>
>> Signed-off-by: Judith Mendez <jm at ti.com>
>> ---
>>   arch/arm64/boot/dts/ti/k3-am642-evm.dts | 17 +++++++++++++++++
>>   arch/arm64/boot/dts/ti/k3-am642-sk.dts  | 17 +++++++++++++++++
>>   2 files changed, 34 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts 
>> b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
>> index f8ec40523254b..68bd6b806f8f0 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
>> @@ -796,6 +796,23 @@ &mcu_m4fss {
>>       status = "okay";
>>   };
>> +/* main_timers 8-11 are used by TI MCU FW */
> 
> Can you make this comment per-core and explain which core
> each timer is reserved for? Makes it easier on me in Zephyr
> to point out why we use the timers that we do, something
> like:
> 
> /* main_timer8 is reserved for mcu_r5fss0_core0 */

Sure, I can do that. Will wait for [0] conversation to close and then
respin the series with this change

[0] 
https://lore.kernel.org/linux-devicetree/f42607f5-e39d-48a1-89c0-11d4982a2426@ti.com/

~ Judith

> 
> Andrew
> 
>> +&main_timer8 {
>> +    status = "reserved";
>> +};
>> +
>> +&main_timer9 {
>> +    status = "reserved";
>> +};
>> +
>> +&main_timer10 {
>> +    status = "reserved";
>> +};
>> +
>> +&main_timer11 {
>> +    status = "reserved";
>> +};
>> +
>>   &serdes_ln_ctrl {
>>       idle-states = <AM64_SERDES0_LANE0_PCIE0>;
>>   };
>> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts 
>> b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
>> index 33e421ec18abb..07fbdf2400d23 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
>> @@ -710,6 +710,23 @@ &mcu_m4fss {
>>       status = "okay";
>>   };
>> +/* main_timers 8-11 are used by TI MCU FW */
>> +&main_timer8 {
>> +    status = "reserved";
>> +};
>> +
>> +&main_timer9 {
>> +    status = "reserved";
>> +};
>> +
>> +&main_timer10 {
>> +    status = "reserved";
>> +};
>> +
>> +&main_timer11 {
>> +    status = "reserved";
>> +};
>> +
>>   &ecap0 {
>>       status = "okay";
>>       /* PWM is available on Pin 1 of header J3 */