[PATCH v6 11/11] arm64: dts: ti: k3-am64: Reserve timers used by MCU FW

[Andrew Davis]

On 4/4/25 7:15 PM, Judith Mendez wrote:
> From: Hari Nagalla <hnagalla at ti.com>
> 
> AM64x device has 4 R5F cores in the main domain. TI MCU firmware uses
> main domain timers as tick timers in these firmwares. Hence keep them
> as reserved in the Linux device tree.
> 
> Signed-off-by: Hari Nagalla <hnagalla at ti.com>
> Signed-off-by: Judith Mendez <jm at ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am642-evm.dts | 17 +++++++++++++++++
>   arch/arm64/boot/dts/ti/k3-am642-sk.dts  | 17 +++++++++++++++++
>   2 files changed, 34 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> index f8ec40523254b..68bd6b806f8f0 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
> @@ -796,6 +796,23 @@ &mcu_m4fss {
>   	status = "okay";
>   };
>   
> +/* main_timers 8-11 are used by TI MCU FW */

Can you make this comment per-core and explain which core
each timer is reserved for? Makes it easier on me in Zephyr
to point out why we use the timers that we do, something
like:

/* main_timer8 is reserved for mcu_r5fss0_core0 */

Andrew

> +&main_timer8 {
> +	status = "reserved";
> +};
> +
> +&main_timer9 {
> +	status = "reserved";
> +};
> +
> +&main_timer10 {
> +	status = "reserved";
> +};
> +
> +&main_timer11 {
> +	status = "reserved";
> +};
> +
>   &serdes_ln_ctrl {
>   	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
>   };
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> index 33e421ec18abb..07fbdf2400d23 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
> @@ -710,6 +710,23 @@ &mcu_m4fss {
>   	status = "okay";
>   };
>   
> +/* main_timers 8-11 are used by TI MCU FW */
> +&main_timer8 {
> +	status = "reserved";
> +};
> +
> +&main_timer9 {
> +	status = "reserved";
> +};
> +
> +&main_timer10 {
> +	status = "reserved";
> +};
> +
> +&main_timer11 {
> +	status = "reserved";
> +};
> +
>   &ecap0 {
>   	status = "okay";
>   	/* PWM is available on Pin 1 of header J3 */