[PATCH v2 2/4] rtc: s32g: add NXP S32G2/S32G3 SoC support

[Ciprian Marian Costea]

On 10/17/2024 11:34 AM, Nobuhiro Iwamatsu wrote:

Hello Nobuhiro,

Thanks for your review!

> Hello,
> 
> 2024年10月15日(火) 19:52 Ciprian Costea <ciprianmarian.costea at oss.nxp.com>:
>>
>> From: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
>>
>> Add a RTC driver for NXP S32G2/S32G3 SoCs.
>>
>> The RTC module is used to enable Suspend to RAM (STR) support
>> on NXP S32G2/S32G3 SoC based boards.
>> RTC tracks clock time during system suspend.
>>
>> RTC from S32G2/S32G3 is not battery-powered and it is not
>> kept alive during system reset.
>>
>> Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc at nxp.com>
>> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc at nxp.com>
>> Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc at nxp.com>
>> Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc at nxp.com>
>> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
>> ---
>>   drivers/rtc/Kconfig    |  11 +
>>   drivers/rtc/Makefile   |   1 +
>>   drivers/rtc/rtc-s32g.c | 778 +++++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 790 insertions(+)
>>   create mode 100644 drivers/rtc/rtc-s32g.c
>>
>> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
>> index e87c3d74565c..18fc3577f6cd 100644
>> --- a/drivers/rtc/Kconfig
>> +++ b/drivers/rtc/Kconfig
>> @@ -2054,4 +2054,15 @@ config RTC_DRV_SSD202D
>>            This driver can also be built as a module, if so, the module
>>            will be called "rtc-ssd20xd".
>>
>> +config RTC_DRV_S32G
>> +       tristate "RTC driver for S32G2/S32G3 SoCs"
>> +       depends on ARCH_S32 || COMPILE_TEST
>> +       depends on COMMON_CLK
>> +       help
>> +         Say yes to enable RTC driver for platforms based on the
>> +         S32G2/S32G3 SoC family.
>> +
>> +         This RTC module can be used as a wakeup source.
>> +         Please note that it is not battery-powered.
>> +
>>   endif # RTC_CLASS
>> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
>> index 8ee79cb18322..a63d010a753c 100644
>> --- a/drivers/rtc/Makefile
>> +++ b/drivers/rtc/Makefile
>> @@ -158,6 +158,7 @@ obj-$(CONFIG_RTC_DRV_RX8025)        += rtc-rx8025.o
>>   obj-$(CONFIG_RTC_DRV_RX8111)   += rtc-rx8111.o
>>   obj-$(CONFIG_RTC_DRV_RX8581)   += rtc-rx8581.o
>>   obj-$(CONFIG_RTC_DRV_RZN1)     += rtc-rzn1.o
>> +obj-$(CONFIG_RTC_DRV_S32G)     += rtc-s32g.o
>>   obj-$(CONFIG_RTC_DRV_S35390A)  += rtc-s35390a.o
>>   obj-$(CONFIG_RTC_DRV_S3C)      += rtc-s3c.o
>>   obj-$(CONFIG_RTC_DRV_S5M)      += rtc-s5m.o
>> diff --git a/drivers/rtc/rtc-s32g.c b/drivers/rtc/rtc-s32g.c
>> new file mode 100644
>> index 000000000000..d6502d8bf616
>> --- /dev/null
>> +++ b/drivers/rtc/rtc-s32g.c
> 
> [...]
> 
>> +enum {
>> +       DIV1 = 1,
>> +       DIV32 = 32,
>> +       DIV512 = 512,
>> +       DIV512_32 = 16384
>> +};
>> +
>> +struct rtc_time_base {
>> +       s64 sec;
>> +       u64 cycles;
>> +       u64 rollovers;
>> +       struct rtc_time tm;
>> +};
>> +
>> +struct rtc_priv {
>> +       struct rtc_device *rdev;
>> +       struct device *dev;
> 
> You don't have to have 'struct device' here. You can refer to 'struct
> device' from
> member variable dev.parent of 'struct rtc_device'.
> 

Thanks for your suggestion. I will update accordingly in V3.

> Best regards,
>    Nobuhiro
> 

Best Regards,
Ciprian