[PATCH v2 2/4] rtc: s32g: add NXP S32G2/S32G3 SoC support

[Nobuhiro Iwamatsu]

Hello,

2024年10月15日(火) 19:52 Ciprian Costea <ciprianmarian.costea at oss.nxp.com>:
>
> From: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
>
> Add a RTC driver for NXP S32G2/S32G3 SoCs.
>
> The RTC module is used to enable Suspend to RAM (STR) support
> on NXP S32G2/S32G3 SoC based boards.
> RTC tracks clock time during system suspend.
>
> RTC from S32G2/S32G3 is not battery-powered and it is not
> kept alive during system reset.
>
> Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc at nxp.com>
> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc at nxp.com>
> Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc at nxp.com>
> Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc at nxp.com>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea at oss.nxp.com>
> ---
>  drivers/rtc/Kconfig    |  11 +
>  drivers/rtc/Makefile   |   1 +
>  drivers/rtc/rtc-s32g.c | 778 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 790 insertions(+)
>  create mode 100644 drivers/rtc/rtc-s32g.c
>
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index e87c3d74565c..18fc3577f6cd 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -2054,4 +2054,15 @@ config RTC_DRV_SSD202D
>           This driver can also be built as a module, if so, the module
>           will be called "rtc-ssd20xd".
>
> +config RTC_DRV_S32G
> +       tristate "RTC driver for S32G2/S32G3 SoCs"
> +       depends on ARCH_S32 || COMPILE_TEST
> +       depends on COMMON_CLK
> +       help
> +         Say yes to enable RTC driver for platforms based on the
> +         S32G2/S32G3 SoC family.
> +
> +         This RTC module can be used as a wakeup source.
> +         Please note that it is not battery-powered.
> +
>  endif # RTC_CLASS
> diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
> index 8ee79cb18322..a63d010a753c 100644
> --- a/drivers/rtc/Makefile
> +++ b/drivers/rtc/Makefile
> @@ -158,6 +158,7 @@ obj-$(CONFIG_RTC_DRV_RX8025)        += rtc-rx8025.o
>  obj-$(CONFIG_RTC_DRV_RX8111)   += rtc-rx8111.o
>  obj-$(CONFIG_RTC_DRV_RX8581)   += rtc-rx8581.o
>  obj-$(CONFIG_RTC_DRV_RZN1)     += rtc-rzn1.o
> +obj-$(CONFIG_RTC_DRV_S32G)     += rtc-s32g.o
>  obj-$(CONFIG_RTC_DRV_S35390A)  += rtc-s35390a.o
>  obj-$(CONFIG_RTC_DRV_S3C)      += rtc-s3c.o
>  obj-$(CONFIG_RTC_DRV_S5M)      += rtc-s5m.o
> diff --git a/drivers/rtc/rtc-s32g.c b/drivers/rtc/rtc-s32g.c
> new file mode 100644
> index 000000000000..d6502d8bf616
> --- /dev/null
> +++ b/drivers/rtc/rtc-s32g.c

[...]

> +enum {
> +       DIV1 = 1,
> +       DIV32 = 32,
> +       DIV512 = 512,
> +       DIV512_32 = 16384
> +};
> +
> +struct rtc_time_base {
> +       s64 sec;
> +       u64 cycles;
> +       u64 rollovers;
> +       struct rtc_time tm;
> +};
> +
> +struct rtc_priv {
> +       struct rtc_device *rdev;
> +       struct device *dev;

You don't have to have 'struct device' here. You can refer to 'struct
device' from
member variable dev.parent of 'struct rtc_device'.

Best regards,
  Nobuhiro

-- 
Nobuhiro Iwamatsu
   iwamatsu at {nigauri.org / debian.org / kernel.org}
   GPG ID: 32247FBB40AD1FA6