[PATCH v3 2/4] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS8300

[Jingyi Wang]

On 11/28/2024 9:12 PM, Dmitry Baryshkov wrote:
> On Thu, Nov 28, 2024 at 04:44:44PM +0800, Jingyi Wang wrote:
>> Enable clock controller, interconnect and pinctrl for Qualcomm
>> QCS8300 platform to boot to UART console.
> 
> ... which is used on the ABC DEF board. The defconfig is being enabled
> for everybody, so at least let them know which board increases the size
> of the default kernel build.
> 
will add that
>>
>> The serial engine depends on gcc, interconnect and pinctrl. Since
>> the serial console driver is only available as built-in, so these
>> configs needs be built-in for the UART device to probe and register
>> the console.
>>
>> Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>
>> Signed-off-by: Jingyi Wang <quic_jingyw at quicinc.com>
>> ---
>>  arch/arm64/configs/defconfig | 3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
>> index d13218d0c30f..3d9e48940c96 100644
>> --- a/arch/arm64/configs/defconfig
>> +++ b/arch/arm64/configs/defconfig
>> @@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y
>>  CONFIG_PINCTRL_MSM8998=y
>>  CONFIG_PINCTRL_QCM2290=y
>>  CONFIG_PINCTRL_QCS404=y
>> +CONFIG_PINCTRL_QCS8300=y
>>  CONFIG_PINCTRL_QDF2XXX=y
>>  CONFIG_PINCTRL_QDU1000=y
>>  CONFIG_PINCTRL_SA8775P=y
>> @@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m
>>  CONFIG_QCM_GCC_2290=y
>>  CONFIG_QCM_DISPCC_2290=m
>>  CONFIG_QCS_GCC_404=y
>> +CONFIG_QCS_GCC_8300=y
>>  CONFIG_SC_CAMCC_7280=m
>>  CONFIG_QDU_GCC_1000=y
>>  CONFIG_SC_CAMCC_8280XP=m
>> @@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
>>  CONFIG_INTERCONNECT_QCOM_OSM_L3=m
>>  CONFIG_INTERCONNECT_QCOM_QCM2290=y
>>  CONFIG_INTERCONNECT_QCOM_QCS404=m
>> +CONFIG_INTERCONNECT_QCOM_QCS8300=y
>>  CONFIG_INTERCONNECT_QCOM_QDU1000=y
>>  CONFIG_INTERCONNECT_QCOM_SA8775P=y
>>  CONFIG_INTERCONNECT_QCOM_SC7180=y
>>
>> -- 
>> 2.25.1
>>
> 
Thanks,
Jingyi