[PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
Andrea della Porta
andrea.porta at suse.com
Mon Nov 25 01:15:06 PST 2024
Hi Rob,
On 20:06 Sun 24 Nov , Rob Herring (Arm) wrote:
>
> On Sun, 24 Nov 2024 11:51:41 +0100, Andrea della Porta wrote:
> > The RP1 is a MFD that exposes its peripherals through PCI BARs. This
> > schema is intended as minimal support for the clock generator and
> > gpio controller peripherals which are accessible through BAR1.
> >
> > Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
> > ---
> > .../devicetree/bindings/misc/pci1de4,1.yaml | 74 +++++++++++++++++++
> > MAINTAINERS | 1 +
> > 2 files changed, 75 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/misc/pci1de4,1.yaml
> >
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/misc/pci1de4,1.example.dtb: clocks at c040018000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
> from schema $id: http://devicetree.org/schemas/clock/raspberrypi,rp1-clocks.yaml#
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/ebb21da5cb41391421b364815705be8b4c415f8a.1732444746.git.andrea.porta@suse.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>
Sorry about that, but even if I see that this should be the case (I've dropped
the clock-name property from raspberrypi,rp1-clock.yaml), I can't reproduce it
with:
# make W=1 dt_binding_check DT_SCHEMA_FILES=pci1de4,1.yaml
and the output is:
CHKDT Documentation/devicetree/bindings
LINT Documentation/devicetree/bindings
DTEX Documentation/devicetree/bindings/misc/pci1de4,1.example.dts
DTC [C] Documentation/devicetree/bindings/misc/pci1de4,1.example.dtb
dt-schema seems up to date. Is my command line correct?
Many thanks,
Andrea
More information about the linux-arm-kernel
mailing list