[PATCH v4 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1

[Rob Herring (Arm)]

On Sun, 24 Nov 2024 11:51:41 +0100, Andrea della Porta wrote:
> The RP1 is a MFD that exposes its peripherals through PCI BARs. This
> schema is intended as minimal support for the clock generator and
> gpio controller peripherals which are accessible through BAR1.
> 
> Signed-off-by: Andrea della Porta <andrea.porta at suse.com>
> ---
>  .../devicetree/bindings/misc/pci1de4,1.yaml   | 74 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/misc/pci1de4,1.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/misc/pci1de4,1.example.dtb: clocks at c040018000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/clock/raspberrypi,rp1-clocks.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/ebb21da5cb41391421b364815705be8b4c415f8a.1732444746.git.andrea.porta@suse.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.