[PATCH v1 2/2] arm64: dts: freescale: imx8mp-verdin: don't limit i2c2 max. clock

[max.oss.09 at gmail.com]

From: Max Krummenacher <max.krummenacher at toradex.com>

Verdin I2C2 may be used to access other I2C devices apart from serving
as an HDMI DDC channel.
Thus do not limit the used I2C clock frequency to 10kHz in the module
specific device tree part.
If an overlay configures i2c2 as DDC the overlay is also responsible
to cope with an appropriate I2C clock.

Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>

---

 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index aef4bef4bccd..3c6b47edd4c1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -650,8 +650,7 @@ eeprom at 50 {
 
 /* Verdin I2C_2_DSI */
 &i2c2 {
-	/* Lower frequency to avoid DDC/EDID issues with certain displays/screens. */
-	clock-frequency = <10000>;
+	clock-frequency = <400000>;
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	pinctrl-1 = <&pinctrl_i2c2_gpio>;
-- 
2.42.0